|
This question may be a little out of bounds for this group but how do you set up RAS under WIN NT. We are running an NT server on our network and TCP/IP on our AS400 (all under ethernet) but am unclear as to how to set up the RAS. Any good publications or is it fairly straight forward??? Carl At 12:09 AM 5/9/97 -0400, Stanley Tang wrote: >One way to do it is to set up a Windows NT server running RAS at your LAN. >The following are the steps: > >1. Set up a Windows NT server and run RAS. >2. Install CA400 for Windows 95 to remote user's PC and use TCP/IP >connection. >3. Set up Dial-up Networking to dial to the RAS via PPP connection and >TCP/IP protocol. >4. Set up AS/400 to use TCP/IP (or you can use SNA server). > >When remote user dials to the RAS via PPP connection, the RAS will act as a >relay and route the traffic to the target AS/400. The TN5250 will provide >terminal emulation. Since PPP supports TCP/IP but not DLC, TCP/IP will be >your choice of protocol. > >Good luck. > > > >At 07:20 97/05/06 -0700, you wrote: >>Hi! >> >>I'm trying to setup a good dialup solution to our AS/400. We currently >>own an ASCII workstation controller, but have not configured it because >>of the relatively slow speeds available (9.6kbs). I an using CA400 for >>Win95 on our LAN based network, and would like to use the Async version >>for the dialups. >> >>Any suggestions? I would like to have a "dependable" connection of at >>least 14.4 kbs. >> >>Thanks in advance! >>-- >>Rushdi A. Ariss >>I. S. Manager >>C. A. Rasmussen, Inc. >>rasmu1@earthlink.net >>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * >>* This is the Midrange System Mailing List! To submit a new message, * >>* send your mail to "MIDRANGE-L@midrange.com". To unsubscribe from * >>* this list send email to MAJORDOMO@midrange.com and specify * >>* 'unsubscribe MIDRANGE-L' in the body of your message. Questions * >>* should be directed to the list owner / operator: david@midrange.com * >>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * >>umidr >> >> > >* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * >* This is the Midrange System Mailing List! To submit a new message, * >* send your mail to "MIDRANGE-L@midrange.com". To unsubscribe from * >* this list send email to MAJORDOMO@midrange.com and specify * >* 'unsubscribe MIDRANGE-L' in the body of your message. Questions * >* should be directed to the list owner / operator: david@midrange.com * >* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > Carl J. Galgano EDI Consulting Services, Inc. 540 Powder Springs Street Suite C19 Marietta, GA 30064 770-422-2995 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This is the Midrange System Mailing List! To submit a new message, * * send your mail to "MIDRANGE-L@midrange.com". To unsubscribe from * * this list send email to MAJORDOMO@midrange.com and specify * * 'unsubscribe MIDRANGE-L' in the body of your message. Questions * * should be directed to the list owner / operator: david@midrange.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
