Re: TCP/IP and TELNET

Scott:
Using telnet there is no support for a printer, so here are the options:
1.  Continue to use the twinax attached printers as is.
2.  Use a network attached printers (ie LaserJet 5 w/Jet Direct card), you
can then assign an IP address to each printer and create an outq on the
AS400 pointing that IP address.
3.  Use printers attached to PC by using an LPD/LPR software on the PC.
Again you need to create an outq on the AS400 pointing to the IP address of
the PC.  The LPD software should be started at startup time and will direct
the spool file to the printer.
It all works pretty well.
Let me know if you need any details about any of the above.
Regards,
Carl

At 10:17 AM 5/23/97 -0400, Scott S. Robertson wrote:
>I am getting ready to roll out many pc's to users on our AS/400 and plan on
them connecting over TCP/IP using Distinct's IntelliTerm product.
>
>Does anyone have a success/horror story in doing this?  I've been following
the threads about the device names, and that doesn't bother me.  Are there
any processing issues or printing issues?  
>
>Currently all printers will still be attached via twinax.  However, we are
planning a move in the next three months and all cabling will be 10BaseT.
Do I need to keep the twinax controller for these devices or is there a
better way.  I am not running CA if that is an issue.
>
>Scott S. Robertson
>Data Processing Sciences Corp.
>http://www.dpsciences.com
>srobertson@dpsciences.com
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>* This is the Midrange System Mailing List!  To submit a new message,   *
>* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
>* this list send email to MAJORDOMO@midrange.com and specify            *
>* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
>* should be directed to the list owner / operator: david@midrange.com   *
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>uucp
>
Carl J. Galgano
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *