Re: Transferring source members from V3R6 - S36

If the S/36 you're referring to is a S/36 Classic (ie. not an Advanced/36)
then you can't do this with the 1/4" tape.  Some possible solutions:
Put a 1/2" tape drive (8809?) on a S/36 5360, and a 9348 1/2" tape on the 
400.
Put an 8" (or 5.25" if the S/36 is a 5363) diskette on the 400.
Connect the 400 and S/36 via modem or modem eliminator, and Xmit the source
using FTS (File Transfer Support).
Download the code to a PC diskette from the 400 with CA/400 or other pkg, and
upload it to the S/36 via PC Support/36 or similar code.
Bring up 5250 emulation sessions to both the 400 and 36 on a PC and 
Cut & Paste the code from one session to the other.
Replace the S/36 with an Advanced/36 and just use the 1/4" tape by saving
source file on 400 with SAVS36F and restoring to Advanced/36 with TOLIBR
or RESTORE followed by TOLIBR from the restored disk file.


On Fri, 23 May 1997, Manikandan V wrote:

> Hi,
> 
> I need to save some CBL36 source members from a V3R6 m/c on a tape and
> later restore the same on a S36 m/c. How should I go about with the SAVE
> and RESTORE operations?
> 
> Appreciate any help/suggestions.
> 
> Thanks,
> Mani
> 
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * This is the Midrange System Mailing List!  To submit a new message,   *
> * send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
> * this list send email to MAJORDOMO@midrange.com and specify            *
> * 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
> * should be directed to the list owner / operator: david@midrange.com   *
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> 
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *