Re: Remote devices on 5294 controller

[Art Tostaine <atostain@xxxxxxxxxxx>]

willy wrote:
> 
> Can anyone tell me how to map workstation port (0-3) and address (0-6)
> numbers on the 5294 controller to the local location address parameter
> (LOCADR) required when creating a remote workstation device description
> ( CRTDEVDSP DEVCLS(*RMT) ) on the AS/400?  LOCADR can take values 00-FE,
> and it looks like (port 0/addr 0) maps to 00, (port 0/addr 1) to 01, and
> so on; but is (port 1/addr 0) 10 (logical) or 07 (sequential)?
> TIA -- Willy
> 
> ----------------
>   Willy Wilson
> willy@riback.com
> Columbia, MO USA


        Address-->      0       1       2       3       4       5       6
Port    0               00      01      02      03      04      05      06
        1               07      08      09      0A      0B      0C      0D
        2               0E      0F      10      11      12      13      14
        3               15      16      17      18      19      1A      1B

I have scrawled this chart on the back of many paper bags, greenbar
printouts,
traffic tickets, etc.


-- 
Art Tostaine, Jr.
Atostain@crecomp.com
Creative Computer Associates, Inc.
Parlin, NJ
(908) 525-9414
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *