Re: Remote devices on 5294 controller

[Paul Dods <pauldods@xxxxxxxxxx>]

At 03:19 PM 5/13/97 -0500, you wrote:
>Can anyone tell me how to map workstation port (0-3) and address (0-6)
>numbers on the 5294 controller to the local location address parameter
>(LOCADR) required when creating a remote workstation device description
>( CRTDEVDSP DEVCLS(*RMT) ) on the AS/400?  LOCADR can take values 00-FE,
>and it looks like (port 0/addr 0) maps to 00, (port 0/addr 1) to 01, and
>so on; but is (port 1/addr 0) 10 (logical) or 07 (sequential)?
>TIA -- Willy

Port 0 maps to addresses 0 thru 6, devices set to address 0 thru 6
Port 1 maps to addresses 7 thru D, devices still set to 0 thru 6
Port 2 maps to addresses E thru 14
Etc.

Example:  Terminal set to address 0, plugged into port 2 address 0, the
device description on the 400 will have address E.

Send me a private email if this is still confusing.  
pauldods@dallas.net

Paul Dods                               
AS/400 Systems Programmer
Michael's Stores, Inc.          
Dallas, Texas

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *