Phil (and anyone else).
What is it in EPDM that you DO need?
We are at release 7. I have worked with PDM/PDM+ at one division of our company. The other division is now looking at developing routings, BOM's, etc. When I look at EPDM it looks to hard to manage with our availible resourses and not really any benefit.
-Tom Stieger
Engineer
California Fine Wire
805-489-5144 x235
message: 1
date: Thu, 26 Jul 2007 13:42:18 -0700
from: Phil Campa <Phil_Campa@xxxxxxxx>
subject: Re: [MAPICS-L] FW: EPDM...
Charlie,
I am curious to learn what in EPDM you don't need?
Phil Campa
"Charley Simpson"
<csimpson@TURBONETI
CSINC.COM> To
Sent by: "MAPICS ERP System Discussion"
mapics-l-bounces+ph <mapics-l@xxxxxxxxxxxx>
il_campa=pall.com@m cc
idrange.com
Subject
Re: [MAPICS-L] FW: EPDM...
07/26/2007 01:13 PM
Please respond to
MAPICS ERP System
Discussion
<mapics-l@midrange.
com>
EPDM does provide some excellent tools and when needed work great. For
us, it's a "sledgehammer on a fly" solution...
Charley
Charley Simpson, CPIM
Director, Material Planning & Logistics
805-426-3414
www.turboneticsinc.com
*** Please note that the information contained in this message may be
privileged and confidential and protected from disclosure. If the
reader of this message is not the intended recipient, or an employee or
agent responsible for delivering this message to the intended recipient,
you are hereby notified that any dissemination, distribution or copying
of this communication is strictly prohibited. If you have received this
communication in error, please notify us by replying to the message and
deleting it from your computer. Thank you. Turbonetics, Inc. ***
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx
[mailto:mapics-l-bounces@xxxxxxxxxxxx] On Behalf Of
DaleGindlesperger@xxxxxxxxxxx
Sent: Thursday, July 26, 2007 1:12 PM
To: MAPICS ERP System Discussion
Subject: Re: [MAPICS-L] FW: EPDM...
Good, no EXCELLENT, answer. For us, EPDM added the alternate routings
and
such that really gave us what we needed.
Dale Gindlesperger
IT Manager/Special Projects Leader
Fleetwood Folding Trailers, Inc.
258 Beacon Street
Somerset, PA 15501
"Charley Simpson"
<csimpson@TURBONE
TICSINC.COM>
To
Sent by: "MAPICS ERP System Discussion"
mapics-l-bounces@ <mapics-l@xxxxxxxxxxxx>
midrange.com
cc
Subject
07/26/2007 04:03 Re: [MAPICS-L] FW: EPDM...
PM
Please respond to
MAPICS ERP System
Discussion
<mapics-l@midrang
e.com>
yeah, I know it sounded a wee bit bizarre, but...
Simply put: EPDM, properly used, FORCES additional steps that for us are
just not necessary and, consequently, not value-add to our processes and
controls.
Charley
Charley Simpson, CPIM
Director, Material Planning & Logistics
805-426-3414
www.turboneticsinc.com
*** Please note that the information contained in this message may be
privileged and confidential and protected from disclosure. If the
reader of this message is not the intended recipient, or an employee or
agent responsible for delivering this message to the intended recipient,
you are hereby notified that any dissemination, distribution or copying
of this communication is strictly prohibited. If you have received this
communication in error, please notify us by replying to the message and
deleting it from your computer. Thank you. Turbonetics, Inc. ***
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx
[mailto:mapics-l-bounces@xxxxxxxxxxxx] On Behalf Of
DaleGindlesperger@xxxxxxxxxxx
Sent: Thursday, July 26, 2007 12:38 PM
To: MAPICS ERP System Discussion
Subject: Re: [MAPICS-L] FW: EPDM...
I was a little horrified that you would want to even CONSIDER that move.
It would be awful to step back from EPDM, although even PDM+ would be
better than nothing........ Out of curiosity, may I ask why that was
being considered?
Dale Gindlesperger
IT Manager/Special Projects Leader
Fleetwood Folding Trailers, Inc.
258 Beacon Street
Somerset, PA 15501
cancel the question....
I forgot that PDM is a dead product and that fixes and improvements will
really only be for EPDM....
you forget these things as you age...
*c*
Charley
Charley Simpson, CPIM
Director, Material Planning & Logistics
805-426-3414
www.turboneticsinc.com <
http://www.turboneticsinc.com/>
From: Charley Simpson
Sent: Thursday, July 26, 2007 11:41 AM
To: 'MAPICS ERP System Discussion'
Subject: EPDM...
R6
Hope everyone is having a good day...
Does anyone know if you can reverse migrate EPDM back to PDM?
Thanks!
Charley
Charley Simpson, CPIM
Director, Material Planning & Logistics
805-426-3414
www.turboneticsinc.com <
http://www.turboneticsinc.com/>
midrange.com
