You also have to include reference to F21 (up to F24) after the: Keycode 88 = F12 Should be: Keycode 88 = F12 F24 Console_24 (look at the Pdf). -----Mensagem original----- De: Projet GPAO [mailto:projet-gpao@xxxxxxxxx] Enviada: terça-feira, 15 de Julho de 2003 15:57 Para: Linux 5250 Development Project Assunto: Re: [LINUX5250] Diskless worstations and keymapping problem > First, congratulations on your work... I think a one floppy distro > with tn5250 will be a great thing... I tried before but with no > success at all. Maybe you should do a mini howto to help others like > me !!! :-) Thanks. If a howto is useful for some people, I'll try to write it. But first it has to work perfectly and I still have that F21-24 problem :( Scott Klement's PicoBSD solution may be a better solution... > About your keymap, i had the same problem but i solved it out (it was > a bit hard)... 1st, make sure you dont have diplicate references in > the file for the same key... That will confuse the keymap alot! 2nd.. > See (my :-) )the portuguese keymap (qwerty) James Rich Included on > the software's PDF... There you will see references on F21 to F24. Thanks for the piece of advice. I took the us5250.map file included in the tn5250 pack for the tests, so I don't think there is a reference twice. I had to apply the folowing changes to make it work under Mandrake: #keycode 1 = Escape Escape keycode 1 = Control_a Escape #ESC as "attention" #keycode 29 = Control keycode 29 = Control_r #Right control as Reset #keycode 78 = KP_Add keycode 78 = Control_x #KP_Add as FieldExit #string F21 = "\033[35~" #string F22 = "\033[36~" #string F23 = "\033[37~" #string F24 = "\033[38~" string F21 = "\033(" #Fonction Keys string F22 = "\033)" string F23 = "\033_" string F24 = "\033+" The first changes are OK on Trinux but the F21-24 keys are still unusable... Cheers, Mathieu _______________________________________________ This is the Linux 5250 Development Project (LINUX5250) mailing list To post a message email: LINUX5250@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/linux5250 or email: LINUX5250-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/linux5250.