× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. DOMINO400
  3. May 2008

RE: Domino setup for Quickr install

I may be having something similar. I did get messages similar to Nathan
when I first started the server.

Attempt by CN=RAVENQR/O=SGContainers to create duplicat
e template Place Catalog in database
/lotus/domino/ravenqr/PlaceCatalog.nsf - rejected.

I have not seen them since the initial startup (after adding QP)

I cannot create a place - I get an error Problem: The place name you
entered is already taken.

There are no places listed and I know the name is unique - I'm pretty
sure there isn't a room called m***********.

One thing I did that I wasn't sure was smart is that I changed the QP
server from Entry to Standard before ever starting.

Michael Crump

Manager, Computing Services
Saint-Gobain Containers, Inc.
1509 S. Macedonia Ave.
Muncie, IN 47302

765.741.7696
765.741.7012 f



Motivation
If a pretty poster and a cute saying are all it takes to motivate you,
you probably have a very easy job. The kind robots will be doing soon.

-----Original Message-----
From: domino400-bounces+mike.crump=saint-gobain.com@xxxxxxxxxxxx
[mailto:domino400-bounces+mike.crump=saint-gobain.com@xxxxxxxxxxxx] On
Behalf Of Chris Whisonant
Sent: Thursday, May 29, 2008 2:22 PM
To: Lotus Domino on the iSeries / AS400
Subject: Re: Domino setup for Quickr install

Yes, his server is listed in all of the agent permissions (I've seen a
screenshot of the server doc in question). I've recently had an issue
where
the wrong server was listed in the create replicas/templates field, but
this
isn't the case for Nathan.

On Thu, May 29, 2008 at 2:06 PM, <seanmurphy@xxxxxxxxxxx> wrote:

Did you set the agent permissions properly on the security tab of the
server document?

There server or "local domain servers" needs to have "Run unrestricted
methods and operations"; "Run restricted LotusScript/Java agents";
"Run Simple and Formula agents";"Run restricted
Java/Javascript/COM";"Run
unrestricted Java/Javascript/COM"



Regards,

Sean




domino400-request@xxxxxxxxxxxx
Sent by: domino400-bounces+seanmurphy=bedbath.com@xxxxxxxxxxxx
05/29/2008 01:05 PM
Please respond to
domino400@xxxxxxxxxxxx


To
domino400@xxxxxxxxxxxx
cc

Subject
Domino400 Digest, Vol 6, Issue 72






Send Domino400 mailing list submissions to
domino400@xxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.midrange.com/mailman/listinfo/domino400
or, via email, send a message with subject or body 'help' to
domino400-request@xxxxxxxxxxxx

You can reach the person managing the list at
domino400-owner@xxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Domino400 digest..."


Today's Topics:

1. Domino setup for Quickr install (Nathan Simpson)
2. RE: Domino setup for Quickr install (Crump, Mike)
3. Re: Domino setup for Quickr install (Chris Whisonant)
4. RE: Domino setup for Quickr install (Gary.Wade@xxxxxxxxxxxxxxxxx)


----------------------------------------------------------------------

message: 1
date: Thu, 29 May 2008 14:32:40 +1000
from: "Nathan Simpson" <nathan@xxxxxxxxxx>
subject: Domino setup for Quickr install

Hi,

I have been chatting with Chris about this and to get a few more heads
thinking about it I thought it might be a good idea to post here as
well.

We have Domino 8.0.1 and Sametime 8.0.1 (on another partition). We are
now

looking at Quickr 8.1 to also run on our iSeries running V5R4.

Right from the beginning I have been unable to create a place. It
doesn't
matter if we have security on or not. No Places can be created. We
have
also
been getting these messages from the very start.

05/28/2008 16:20:50 Attempt by CN=QUICKR/O=AWH/C=AU to create
duplicate
template h1_contacts in database
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Contacts1.nsf
-rejected.

05/28/2008 16:20:56 Attempt by CN=QUICKR/O=AWH/C=AU to create
duplicate
template h1_meetingroom in database
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Main.nsf - rejected.

'tempplace1' is the Place I am trying to create

I have read different things and Chris has opened my eyes to a few
things
so
I ended up wiping everything to try and start again. Chris made it
sound
like a permissions error somewhere, and from my reading it looks like
the
Quickr permissions are ok. So I thought it might be a Domino setup
problem.

He is the command I used to setup the Quickr Domino parition

CFGDOMSVR SERVER(QUICKR)
OPTION(*ADD)
DTADIR('/LOTUS/DOMINO/QUICKR/DATA')
TIMEZONE(ZE10)
NABSVR(AWH400)
ADDSVRID('/Path/DominoID/ServerCertID/quickr.id')
WEB(*HTTP)
CNNSRV(*NONE)
CNTRYID(AU)
OUNAME(*BLANK *GEN)
CERTID('/Path/DominoID/ServerCertID/cert.id' password)
ADMID('/Path/DominoID/ServerCertID/user.id' password)
SVRID('/Path/DominoID/ServerCertID/server.id')
AUTOSTART(*YES)
LOGREPEVT(*NO)
LOGSSNEVT(*NO)
TCPOPT(*NOENCRYPT QUICKR.AWH.COM.AU)
SVRHSTNAME(quickr.awh.com.au)
SBS(DOMINO03)
ADLSRV(*RNRMGR *AMGR *ADMINP *REPLICA)
TEXT('AWH Quickr Server')

Am I missing anything? Should there be any special Domino setup
parameters

that I should set for Quickr? What about after the initial setup of
Domino?
Anything to change before I load Quickr? In particular security
settings?

Thanks

--
Regards

Nathan Simpson
Network Administrator/System Support
AWH Pty Ltd
Wool / Cotton / Property / Logistics / Exchange

Ph 03 5272 9227
Fx 03 5274 2084
Mob 0417 317 411

This message and any attachments are confidential and may be subject
to
legal or other professional privilege. Any confidential or privilege
is
not
waived or lost because this e-mail has been sent to you by mistake. If
you

have received this transmission in error, please notify us by reply
e-mail,
or phone +613 5272 9227 and delete our e-mail.



------------------------------

message: 2
date: Thu, 29 May 2008 08:38:16 -0400
from: "Crump, Mike" <Mike.Crump@xxxxxxxxxxxxxxxx>
subject: RE: Domino setup for Quickr install

Nathan,

I don't see anything incorrect. I'm actually going to be doing this
today and tomorrow morning. After reading your note I went back and
reviewed (again) the preparing, installing, and configuration chapters
in the Quickr infocenter
http://publib.boulder.ibm.com/infocenter/lqkrhelp/v8r0/index.jsp I am
not seeing anything that would lead me to see how your error could be
occurring. It looks to me like there are a few 'configuration'
settings
that are pretty minor and standard(entry to standard version, binding
to
IP addy, etc.) but nothing that seems to be security related. There
is
a good section on security but I see nothing in there that says this
must be done before you can use it kind of language.

You have me worried now. I will let you know if I run into any
problems
or successes.

Michael Crump

Manager, Computing Services
Saint-Gobain Containers, Inc.
1509 S. Macedonia Ave.
Muncie, IN 47302

765.741.7696
765.741.7012 f



Motivation
If a pretty poster and a cute saying are all it takes to motivate you,
you probably have a very easy job. The kind robots will be doing soon.

-----Original Message-----
From: domino400-bounces+mike.crump=saint-gobain.com@xxxxxxxxxxxx
[mailto:domino400-bounces+mike.crump <domino400-bounces%2Bmike.crump>=
saint-gobain.com@xxxxxxxxxxxx] On
Behalf Of Nathan Simpson
Sent: Thursday, May 29, 2008 12:33 AM
To: domino400@xxxxxxxxxxxx
Subject: Domino setup for Quickr install

Hi,

I have been chatting with Chris about this and to get a few more heads
thinking about it I thought it might be a good idea to post here as
well.

We have Domino 8.0.1 and Sametime 8.0.1 (on another partition). We are
now
looking at Quickr 8.1 to also run on our iSeries running V5R4.

Right from the beginning I have been unable to create a place. It
doesn't
matter if we have security on or not. No Places can be created. We
have
also
been getting these messages from the very start.

05/28/2008 16:20:50 Attempt by CN=QUICKR/O=AWH/C=AU to create
duplicate
template h1_contacts in database
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Contacts1.nsf
-rejected.

05/28/2008 16:20:56 Attempt by CN=QUICKR/O=AWH/C=AU to create
duplicate
template h1_meetingroom in database
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Main.nsf - rejected.

'tempplace1' is the Place I am trying to create

I have read different things and Chris has opened my eyes to a few
things so
I ended up wiping everything to try and start again. Chris made it
sound

like a permissions error somewhere, and from my reading it looks like
the
Quickr permissions are ok. So I thought it might be a Domino setup
problem.

He is the command I used to setup the Quickr Domino parition

CFGDOMSVR SERVER(QUICKR)
OPTION(*ADD)
DTADIR('/LOTUS/DOMINO/QUICKR/DATA')
TIMEZONE(ZE10)
NABSVR(AWH400)
ADDSVRID('/Path/DominoID/ServerCertID/quickr.id')
WEB(*HTTP)
CNNSRV(*NONE)
CNTRYID(AU)
OUNAME(*BLANK *GEN)
CERTID('/Path/DominoID/ServerCertID/cert.id' password)
ADMID('/Path/DominoID/ServerCertID/user.id' password)
SVRID('/Path/DominoID/ServerCertID/server.id')
AUTOSTART(*YES)
LOGREPEVT(*NO)
LOGSSNEVT(*NO)
TCPOPT(*NOENCRYPT QUICKR.AWH.COM.AU)
SVRHSTNAME(quickr.awh.com.au)
SBS(DOMINO03)
ADLSRV(*RNRMGR *AMGR *ADMINP *REPLICA)
TEXT('AWH Quickr Server')

Am I missing anything? Should there be any special Domino setup
parameters
that I should set for Quickr? What about after the initial setup of
Domino?
Anything to change before I load Quickr? In particular security
settings?

Thanks

--
Regards

Nathan Simpson
Network Administrator/System Support
AWH Pty Ltd
Wool / Cotton / Property / Logistics / Exchange

Ph 03 5272 9227
Fx 03 5274 2084
Mob 0417 317 411

This message and any attachments are confidential and may be subject
to
legal or other professional privilege. Any confidential or privilege
is
not
waived or lost because this e-mail has been sent to you by mistake. If
you
have received this transmission in error, please notify us by reply
e-mail,
or phone +613 5272 9227 and delete our e-mail.

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing
list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.



------------------------------

message: 3
date: Thu, 29 May 2008 08:49:58 -0400
from: "Chris Whisonant" <chris.whisonant@xxxxxxxxx>
subject: Re: Domino setup for Quickr install

Yes, I haven't seen anything that stands out either. Although, I had a
windoze customer the other week with issues and we had to completely
uninstall Quickr and Domino and start over. But I think this was
because
of
a bad initial install by a 3rd party.

On Thu, May 29, 2008 at 8:38 AM, Crump, Mike
<Mike.Crump@xxxxxxxxxxxxxxxx>
wrote:

Nathan,

I don't see anything incorrect. I'm actually going to be doing this
today and tomorrow morning. After reading your note I went back and
reviewed (again) the preparing, installing, and configuration
chapters
in the Quickr infocenter
http://publib.boulder.ibm.com/infocenter/lqkrhelp/v8r0/index.jsp I
am
not seeing anything that would lead me to see how your error could
be
occurring. It looks to me like there are a few 'configuration'
settings
that are pretty minor and standard(entry to standard version,
binding to
IP addy, etc.) but nothing that seems to be security related. There
is
a good section on security but I see nothing in there that says this
must be done before you can use it kind of language.

You have me worried now. I will let you know if I run into any
problems
or successes.

Michael Crump

Manager, Computing Services
Saint-Gobain Containers, Inc.
1509 S. Macedonia Ave.
Muncie, IN 47302

765.741.7696
765.741.7012 f



Motivation
If a pretty poster and a cute saying are all it takes to motivate
you,
you probably have a very easy job. The kind robots will be doing
soon.

-----Original Message-----
From: domino400-bounces+mike.crump=saint-gobain.com@xxxxxxxxxxxx
[mailto:domino400-bounces+mike.crump
<domino400-bounces%2Bmike.crump><domino400-bounces%2Bmike.crump>=
saint-gobain.com@xxxxxxxxxxxx] On
Behalf Of Nathan Simpson
Sent: Thursday, May 29, 2008 12:33 AM
To: domino400@xxxxxxxxxxxx
Subject: Domino setup for Quickr install

Hi,

I have been chatting with Chris about this and to get a few more
heads
thinking about it I thought it might be a good idea to post here as
well.

We have Domino 8.0.1 and Sametime 8.0.1 (on another partition). We
are
now
looking at Quickr 8.1 to also run on our iSeries running V5R4.

Right from the beginning I have been unable to create a place. It
doesn't
matter if we have security on or not. No Places can be created. We
have
also
been getting these messages from the very start.

05/28/2008 16:20:50 Attempt by CN=QUICKR/O=AWH/C=AU to create
duplicate
template h1_contacts in database
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Contacts1.nsf
-rejected.

05/28/2008 16:20:56 Attempt by CN=QUICKR/O=AWH/C=AU to create
duplicate
template h1_meetingroom in database
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Main.nsf -
rejected.

'tempplace1' is the Place I am trying to create

I have read different things and Chris has opened my eyes to a few
things so
I ended up wiping everything to try and start again. Chris made it
sound

like a permissions error somewhere, and from my reading it looks
like
the
Quickr permissions are ok. So I thought it might be a Domino setup
problem.

He is the command I used to setup the Quickr Domino parition

CFGDOMSVR SERVER(QUICKR)
OPTION(*ADD)
DTADIR('/LOTUS/DOMINO/QUICKR/DATA')
TIMEZONE(ZE10)
NABSVR(AWH400)
ADDSVRID('/Path/DominoID/ServerCertID/quickr.id')
WEB(*HTTP)
CNNSRV(*NONE)
CNTRYID(AU)
OUNAME(*BLANK *GEN)
CERTID('/Path/DominoID/ServerCertID/cert.id' password)
ADMID('/Path/DominoID/ServerCertID/user.id' password)
SVRID('/Path/DominoID/ServerCertID/server.id')
AUTOSTART(*YES)
LOGREPEVT(*NO)
LOGSSNEVT(*NO)
TCPOPT(*NOENCRYPT QUICKR.AWH.COM.AU)
SVRHSTNAME(quickr.awh.com.au)
SBS(DOMINO03)
ADLSRV(*RNRMGR *AMGR *ADMINP *REPLICA)
TEXT('AWH Quickr Server')

Am I missing anything? Should there be any special Domino setup
parameters
that I should set for Quickr? What about after the initial setup of
Domino?
Anything to change before I load Quickr? In particular security
settings?

Thanks

--
Regards

Nathan Simpson
Network Administrator/System Support
AWH Pty Ltd
Wool / Cotton / Property / Logistics / Exchange

Ph 03 5272 9227
Fx 03 5274 2084
Mob 0417 317 411

This message and any attachments are confidential and may be subject
to
legal or other professional privilege. Any confidential or privilege
is
not
waived or lost because this e-mail has been sent to you by mistake.
If
you
have received this transmission in error, please notify us by reply
e-mail,
or phone +613 5272 9227 and delete our e-mail.

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing
list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing
list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.




--

Chris
http://cwhisonant.blogspot.com


------------------------------

message: 4
date: Thu, 29 May 2008 09:09:33 -0400
from: Gary.Wade@xxxxxxxxxxxxxxxxx
subject: RE: Domino setup for Quickr install

I'm running Quickr8 on a domino partiion on an V5R4 platform. Just
FYI:

Previously I was at R702 server, 8001Quickr and upgraded to R8.1 and
Quickr 8.1 HX 3.

Previously Quickr was working ok. After upgrade I found (1) I could
not
create an Online Meeting with my Sametime server in a site, (2)
Awareness
did not display consistently in a site, and (3) a button that allowed
an
Author or Editor to create new maintenance request no longer displayed
unless you log in as a Manager or above.

Got an IBM support call in at this time


------------------------------------------------------------------------
------
Gary L Wade
Lotus Notes Administrator
Blackberry Administrator
City of Orlando
400 S. Orange Ave.
PO Box 4990
Orlando, FL 32802-4990
(PH) 407-246-3796
(FAX) 407-246-2878
(CELL) 321-229-6468
gary.wade@xxxxxxxxxxxxxxxxx

Florida has a very broad public records law. As a result, any written
communication created or received by City of Orlando officials and
employees will be made available to the public and media, upon
request,
unless otherwise exempt. Under Florida law, email addresses are
public
records. If you do not want your email address released in response
to a
public records request, do not send electronic mail to this office.
Instead, contact our office by phone or in writing.




From:
"Crump, Mike" <Mike.Crump@xxxxxxxxxxxxxxxx>
To:
"Lotus Domino on the iSeries / AS400" <domino400@xxxxxxxxxxxx>
Date:
05/29/2008 08:38 AM
Subject:
RE: Domino setup for Quickr install



Nathan,

I don't see anything incorrect. I'm actually going to be doing this
today and tomorrow morning. After reading your note I went back and
reviewed (again) the preparing, installing, and configuration chapters
in the Quickr infocenter
http://publib.boulder.ibm.com/infocenter/lqkrhelp/v8r0/index.jsp I am
not seeing anything that would lead me to see how your error could be
occurring. It looks to me like there are a few 'configuration'
settings
that are pretty minor and standard(entry to standard version, binding
to
IP addy, etc.) but nothing that seems to be security related. There
is
a good section on security but I see nothing in there that says this
must be done before you can use it kind of language.

You have me worried now. I will let you know if I run into any
problems
or successes.

Michael Crump

Manager, Computing Services
Saint-Gobain Containers, Inc.
1509 S. Macedonia Ave.
Muncie, IN 47302

765.741.7696
765.741.7012 f



Motivation
If a pretty poster and a cute saying are all it takes to motivate you,
you probably have a very easy job. The kind robots will be doing soon.

-----Original Message-----
From: domino400-bounces+mike.crump=saint-gobain.com@xxxxxxxxxxxx
[mailto:domino400-bounces+mike.crump <domino400-bounces%2Bmike.crump>=
saint-gobain.com@xxxxxxxxxxxx] On
Behalf Of Nathan Simpson
Sent: Thursday, May 29, 2008 12:33 AM
To: domino400@xxxxxxxxxxxx
Subject: Domino setup for Quickr install

Hi,

I have been chatting with Chris about this and to get a few more heads
thinking about it I thought it might be a good idea to post here as
well.

We have Domino 8.0.1 and Sametime 8.0.1 (on another partition). We are
now
looking at Quickr 8.1 to also run on our iSeries running V5R4.

Right from the beginning I have been unable to create a place. It
doesn't
matter if we have security on or not. No Places can be created. We
have
also
been getting these messages from the very start.

05/28/2008 16:20:50 Attempt by CN=QUICKR/O=AWH/C=AU to create
duplicate
template h1_contacts in database
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Contacts1.nsf
-rejected.

05/28/2008 16:20:56 Attempt by CN=QUICKR/O=AWH/C=AU to create
duplicate
template h1_meetingroom in database
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Main.nsf - rejected.

'tempplace1' is the Place I am trying to create

I have read different things and Chris has opened my eyes to a few
things so
I ended up wiping everything to try and start again. Chris made it
sound

like a permissions error somewhere, and from my reading it looks like
the
Quickr permissions are ok. So I thought it might be a Domino setup
problem.

He is the command I used to setup the Quickr Domino parition

CFGDOMSVR SERVER(QUICKR)
OPTION(*ADD)
DTADIR('/LOTUS/DOMINO/QUICKR/DATA')
TIMEZONE(ZE10)
NABSVR(AWH400)
ADDSVRID('/Path/DominoID/ServerCertID/quickr.id')
WEB(*HTTP)
CNNSRV(*NONE)
CNTRYID(AU)
OUNAME(*BLANK *GEN)
CERTID('/Path/DominoID/ServerCertID/cert.id' password)
ADMID('/Path/DominoID/ServerCertID/user.id' password)
SVRID('/Path/DominoID/ServerCertID/server.id')
AUTOSTART(*YES)
LOGREPEVT(*NO)
LOGSSNEVT(*NO)
TCPOPT(*NOENCRYPT QUICKR.AWH.COM.AU)
SVRHSTNAME(quickr.awh.com.au)
SBS(DOMINO03)
ADLSRV(*RNRMGR *AMGR *ADMINP *REPLICA)
TEXT('AWH Quickr Server')

Am I missing anything? Should there be any special Domino setup
parameters
that I should set for Quickr? What about after the initial setup of
Domino?
Anything to change before I load Quickr? In particular security
settings?

Thanks

--
Regards

Nathan Simpson
Network Administrator/System Support
AWH Pty Ltd
Wool / Cotton / Property / Logistics / Exchange

Ph 03 5272 9227
Fx 03 5274 2084
Mob 0417 317 411

This message and any attachments are confidential and may be subject
to
legal or other professional privilege. Any confidential or privilege
is
not
waived or lost because this e-mail has been sent to you by mistake. If
you
have received this transmission in error, please notify us by reply
e-mail,
or phone +613 5272 9227 and delete our e-mail.

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing
list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing
list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.





------------------------------

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) digest
list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.



End of Domino400 Digest, Vol 6, Issue 72
****************************************

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing
list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.





As an Amazon Associate we earn from qualifying purchases.

This thread ...
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.