Re: Restarting QuickPlace server / Starting QP via CL

I start our QP server nightly.

I did a DSPMSGD RANGE(LNT0920) MSGF(QNOTES/QLTBASEMS6) and it looks like 
I'd need more information from the joblog.  Most importantly, the error 
code.

Hint:  CHGUSRPRF QNOTES and give it *JOBCTL.  Also have the subprogram 
that starts it adopt authority of QNOTES.  Put the CHGUSRPRF QNOTES in 
your list of tasks to do everytime you put on a Notes upgrade.

Message ID . . . . . . . . . :   LNT0920 
Message file . . . . . . . . :   QLTBASEMS6 
  Library  . . . . . . . . . :     QNOTES 
 
Message . . . . :   Error &1 has occurred, server not started 
Cause . . . . . :   An error has occurred trying to start the Domino 
server
  &5, the error code is &1: 
    --  1 = Not authorized to use the STRDOMSVR command. 
    --  2 = Error retrieving subsystem name. 
    --  3 = Error retrieving security information. Message ID is &2. 
    --  4 = Error retrieving subsystem information. Message ID is &2. 
  Subsystem is &4/&3. 
    --  5 = Error starting subsystem &4/&3. 
    --  6 = Error submitting a job to the subsystem &4/&3. 
    --  7 = Error retrieving server information. 
    --  8 = Error validating the server name. 
    --  9 = Server is in a *STANDBY state 
    -- 10 = Server is being saved.  
Recovery  . . . :  
    -- 1  You need at least *JOBCTL to use this command. See your system   

  administrator.  
    -- 2 - 6  Save this job log and contact your service representative.   

    -- 7 - 8 The server name, &5,  is probably not correct. Enter a 
configured
  server name and try the command again. If the server name is valid and   

  configured, then save the job log and contact your service 
representative. 
    -- 9 The server is configured as part of a Domino application Cluster  
 
  Resource Group (CRG) &6. It is in *STANDBY state when application CRG &6 
is 
  not primary (active) on this cluster node. The application CRG can be  
  started with a STRDOMCRG command. If the server's application CRG is 
already
  started its active primary cluster node can be changed to this system 
using 
  the CHGDOMPRI command. Then try the request again.  
    -- 10 The server is being saved by another job on this system. The 
server
  cannot be started until this operation is complete. When the save of the 
 
  server completes try the request again.  
Technical description . . . . . . . . :   Errors have occurred and 
processing
  can not continue.  

Rob Berendt