Well yes, there is - sorry. On a V5R1 machine ADDSMTPLE TYPE(*CLTBIND) INTNETADR('192.168.1.254') ADDSMTPLE TYPE(*SVRBIND) INTNETADR('192.168.1.254') On the primitive machines there are some tom-toms you can pound and some data areas you can create. Rob Berendt ================== "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin "Fritz Hayes" <fhayes@spiritone. To: email@example.com com> cc: Sent by: Fax to: domino400-admin@mi Subject: RE: New to Domino and Notes drange.com 12/06/2001 11:26 AM Please respond to domino400 Rob, In't there also a step to isolate the AS/400 based services (SMTP, LDAP, etc) to a single IP address (192.168.1.254) so that the Domino services get the other IP address (192.168.1.1)? Best Regards Fritz Hayes Atwater Associates <snip> |Check the following: | |CFGTCP |1. Work with TCP/IP interfaces |192.168.1.1 should be there |F11=Display interface status |and it should be active | |CFGTCP |10. Work with TCP/IP host table entries |We have the following entry for our smtp partition. dekko-1 |is our NT domain. DEKKO.COM is our email domain. |10.10.1.141 INTERNOTES | INTERNOTES.dekko-1 | INTERNOTES.DEKKO.COM | DEKKO.COM | _______________________________________________ This is the Lotus Domino on the iSeries / AS400 (DOMINO400) mailing list To post a message email: DOMINO400@midrange.com To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/cgi-bin/listinfo/domino400 or email: DOMINO400firstname.lastname@example.org Before posting, please take a moment to review the archives at http://archive.midrange.com/domino400.