× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Try clearing the CACHE directory, rebooting, and trying again.  I get
malformed entries and other problems on a regular basis; a cold start seems
to do the trick.

-reeve

> -----Original Message-----
> From: code400-l-bounces@xxxxxxxxxxxx
[mailto:code400-l-bounces@xxxxxxxxxxxx] On Behalf Of
> Westdorp, Tom
> Sent: Tuesday, February 25, 2003 5:08 PM
> To: code400-l@xxxxxxxxxxxx
> Subject: Lost ability to verify
> 
> Trying to verify, with prompt and a cache refresh, a service program and
it
> bombs with (I think):
> 
> CODE.LOG:
> General Protection Fault exception occurred at EIP = 035BA04A on thread
> 04FC.
> Register Dump at point of exception:
> EAX = 0012DC14    EBX = 03747E58  ECX = 00000006    EDX = 00000030
> EBP = 0012DC48    EDI = 00000004  ESI = 03747E59    ESP = 0012DBE4
> ÿCS =     001B  CSLIM = FFFFFFFF   DS =     0023  DSLIM = FFFFFFFF
> ÿES =     0023  ESLIM = FFFFFFFF   FS =     003B  FSLIM = 00000FFF
> ÿGS =     0000  GSLIM = 00000000   SS =     0023  SSLIM = FFFFFFFF
> NPX Environment:
> CW = 0262      TW = FFFF  IP = 3605:077D001B
> SW = 0100  OPCODE = 077D  OP = D3AC:FFFF0023
> NPX Stack:
> No valid stack entries.
> Process terminating.
> 
> Using WDSc 4, current I think (applied the efix last week)
> CAE 5.5 20021118
> System is v5r2
> workstation is Win2k Service Pack 3 (build 2195)
> system is a 1000 megahertz Intel Pentium III
> 32 kilobyte primary memory cache
> 256 kilobyte secondary memory cache
> 512mb Ram
> 
> Entering via codeedit.exe
> 
> It used to work, at least prior to the efix.
> 
> Any ideas from the code team?
> 
> Thanks!
> _______________________________________________
> This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> To post a message email: CODE400-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/code400-l
> or email: CODE400-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/code400-l.
> 
> NOTE: WDSc for iSeries disucssion has it's own mailing list.
> Information can be found at
http://lists.midrange.com/cgi-bin/listinfo/wdsc-l




As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.