× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. CODE400-L
  3. November 2001

Network connection

I'm having trouble starting a CODE/400 server when working through my
network connection.

I have two systems connected to a Netgear RT314 Gateway Router (no ROTFLYAO,
please) and then into a cable modem up to the 820 via a firewall.  The RT314
provides NAT and some firewall protection.  The IP address seen by the RT314
is not fixed (today it's 65.34.yada.yada); within the LAN, the RT314 is
192.168.0.1 and the other systems are ".2" and ".3".

When I use a dial-up connection (without the RT314), everything works fine
(because CODE/400 knows my IP address).  I think this shows the server end
is not causing the problem.

I assume the RT314 is the issue.  The iBox is giving me EVF4000, "A remote
host refused an attempted connect operation."  (3425).

I'd be grateful for any help...

Thanks,
Reeve

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.