Re: Mystified

[Jeff Crosby <jlcrosby@xxxxxxx>]

Edmund.Reinhardt@ca.ibm.com wrote:

> Your E command is probably not working because of the STRCODE problem.
> Why don't you post your STRCODE job log so that people can see what went 
> wrong.

The reason I haven't posted that detail is the myriad of problems _others_ were
having with this install.  I went back into the archives and tried everything I
could find as suggestions _there_ first.  This is not my first post, however,
regarding troubles on this install.

Here is the job log:

strcode
The job's CCSID value is changed from 65535 to 00037 while the STRCODE
  command is active.
Default information for STRCODE retrieved successfully.
A TCP/IP communications error occurred.
Unable to start TCP/IP connection with the workstation.               


Details for the last 3 messages:


                         Additional Message Information
Message ID . . . . . . :   EVF4100       Severity . . . . . . . :   10
Message type . . . . . :   Information
Date sent  . . . . . . :   01/22/01      Time sent  . . . . . . :  
07:22:44                                
Message . . . . :   Default information for STRCODE retrieved successfully.
Technical description . . . . . . . . :
- The default information has been retrieved from *LIBL/STRCODE *USRSPC.
- The server name is AS400.
- The communications type is *TCPIP.
- The APPC remote location name is *ICFF.
- The TCP/IP remote location name is 4.0.0.3.
- The TCP/IP port is 4200.                                                  


                         Additional Message Information
Message ID . . . . . . :   EVF4000       Severity . . . . . . . :   30
Message type . . . . . :   Diagnostic
Date sent  . . . . . . :   01/22/01      Time sent  . . . . . . :   07:22:44
Message . . . . :   A TCP/IP communications error occurred.
Cause . . . . . :   A route to the remote host is not available.
- The name of the error is ERR_TCPIP (3429).
- The name of the function is ipClientConnect-connect.                      


                         Additional Message Information
Message ID . . . . . . :   EVF4002       Severity . . . . . . . :   30
Message type . . . . . :   Diagnostic
Date sent  . . . . . . :   01/22/01      Time sent  . . . . . . :   07:22:44
Message . . . . :   Unable to start TCP/IP connection with the workstation.
Cause . . . . . :   The TCP/IP connection between the AS/400 and CODE/400 on
   the remote workstation can not be established due to one or more errors.
Recovery  . . . :   This is likely due to a configuration problem on the
  AS/400 or remote workstation. Look in the job log for any previous errors, 
  correct the problem and run the STRCODE command again.
Technical description . . . . . . . . :   The connection to CODE/400 on the 
  remote workstation could not be established.
- The remote location name is '4.0.0.3'.
- The port number is 4200.                                                  

> You obviously have a user library as your current library.

Yes.  I always have.  What should I have for my current library?

-- 
-Jeff
The opinions expressed are my own and not necessarily 
the opinion of my company.  Unless I say so.
+---
| This is the CODE/400 Mailing List!
| To submit a new message, send your mail to CODE400-L@midrange.com.
| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: larry@paque.net
+---