Installed Svc Pack - STRCODE No Work

[Jeff Crosby <jlcrosby@xxxxxxx>]

I installed SP1 for WDT V4R5M1 today.  Since then the STRCODE command will not
work.  I get the following in the job log:

                        Additional Message Information

Message ID . . . :   EVF4000       Severity . . . . :   30
Message type . . :   Diagnostic
Date sent  . . . :   01/15/01      Time sent  . . . :   16:13:33

Message . . . . :   A TCP/IP communications error occurred.
Cause . . . . . :   A route to the remote host is not available.
- The name of the error is ERR_TCPIP (3429).
- The name of the function is ipClientConnect-connect.

The prior job log message was:

                         Additional Message Information

Message ID . . . :   EVF4100       Severity . . . . :   10
Message type . . :   Information
Date sent  . . . :   01/15/01      Time sent  . . . :   16:13:3

Message . . . . :   Default information for STRCODE retrieved successfully.
Technical description . . . . . . . . :
- The default information has been retrieved from *LIBL/STRCODE *USRSPC.
- The server name is AS400.
- The communications type is *TCPIP.
- The APPC remote location name is *ICFF.
- The TCP/IP remote location name is 4.0.0.3.
- The TCP/IP port is 4200.







-- 
-Jeff
The opinions expressed are my own and not necessarily 
the opinion of my company.  Unless I say so.
+---
| This is the CODE/400 Mailing List!
| To submit a new message, send your mail to CODE400-L@midrange.com.
| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: larry@paque.net
+---