× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I have two range of addresses I need to serve off of this lpar I just
migrated from Power 6 to Power 8.
Back on Power 6 this lpar had two individual lan cards.
Address 10.10.1.194 was on one line description and 10.10.252.193 was
on another.
10.10.1.194 is in vlan 1.
10.10.252.193 is in vlan 252.

On the Power 8 we have two vios lpars serving up ethernet.
I can't get it to recognize vlan 1.

I told the virtual ethernet adapter on the vios lpars that it should
use the 802.1q and serve up vlans 4, 6, 209, 252 but 1 says "Add VLAN
ID:The Additional Vlan id is not in the valid range."

As a secondary I can't get the 252 vlan id to do anything when I active
the partition via the profile.

I do have this in
WRKHDWRSC *CMN
Resource name . . . . . . . : CMN03
Text . . . . . . . . . . . . : Ethernet Port
Type-model . . . . . . . . . : 268C-002
Serial number . . . . . . . : 00-00000
Part number . . . . . . . . :
Location : U8286.41A.214403V-V6-C2-T1

I copied the line description over from the Power 6 and just changed
the resource name to CMN03. Perhaps some of these parameters are an
issue?
Line description . . . . . . . . . : LANLINSYS
Option . . . . . . . . . . . . . . : *BASIC
Category of line . . . . . . . . . : *ELAN

Resource name . . . . . . . . . . : CMN03
Online at IPL . . . . . . . . . . : *NO
Vary on wait . . . . . . . . . . . : *NOWAIT
Network controller . . . . . . . . : LANLINET
Local adapter address . . . . . . : 02002EF8C003
Exchange identifier . . . . . . . : 05628F83
Ethernet standard . . . . . . . . : *ALL
Line speed . . . . . . . . . . . . : 1G
Current line speed . . . . . . . . : *AUTO
Duplex . . . . . . . . . . . . . . : *FULL
Current duplex . . . . . . . . . . : *AUTO
Serviceability options . . . . . . : *NONE
Maximum frame size . . . . . . . . : 1496
Maximum controllers . . . . . . . : 256
Error threshold level . . . . . . : *OFF
Generate test frame . . . . . . . : *YES
Message queue . . . . . . . . . . : *SYSVAL
Current message queue . . . . . . : QSYSOPR
Library . . . . . . . . . . . . : QSYS
Text . . . . . . . . . . . . . . . : GB Ethernet line
----Source Service Access Points-----
SSAP Maximum Frame Type
06 1496 *NONSNA
AA 1496 *NONSNA
DC 1496 *NONSNA
12 1496 *NONSNA
16 1496 *NONSNA
1A 1496 *NONSNA
Link speed . . . . . . . . . . . . : *MAX
Cost/connect time . . . . . . . . : 0
Cost/byte . . . . . . . . . . . . : 0
Security for line . . . . . . . . : *NONSECURE
Propagation delay . . . . . . . . : *LAN
User-defined 1 . . . . . . . . . . : 128
User-defined 2 . . . . . . . . . . : 128
User-defined 3 . . . . . . . . . . : 128
Autocreate controller . . . . . . : *YES
Autodelete controller . . . . . . : 1440

IBM i is 7.1
PTF Group Level
SF99711 2
SF99710 14143
SF99709 114
SF99708 33
SF99707 8
SF99706 7
SF99705 11
SF99701 29
SF99647 8
SF99637 9
SF99627 11
SF99617 6
SF99572 16
SF99381 8
SF99380 11
SF99369 15
SF99368 28
SF99367 8
SF99366 10
SF99364 9
SF99363 15
SF99362 36
SF99359 16
SF99145 7


Rob Berendt

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.