MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » July 2014

Re: Installing FC 5772 Fiber Ethernet Card



fixed

There may be a few other parameters which may differ. Here's an example,
from a setup file we have:
/* When configuring a line for RACK3HST the below had to be changed. One
+
critical item was changing ETHSTD from *ALL to *ETHV2. All is only
+
supported on LAN cards that support less than 1GB speeds. The other
thing +
that had to be changed was MAXCTL from 256 down to 128. I also had the
+
wrong resource name. Host Ethernet Adapters (from the 4 ports on the
CEC) +
are in the 181* family. IBM had me just run a simple +
CRTLINETH LIND(LANLIN) RSRCNAME(CMN03) ONLINE(*NO) ETHSTD(*ETHV2) +
and that worked like a champ. */
CRTLINETH LIND(LANLIN) RSRCNAME(CMN03) ONLINE(*NO) +
VRYWAIT(*NOWAIT) ADPTADR(*ADPT) EXCHID(056C2091) +
ETHSTD(*ETHV2) LINESPEED(1G) DUPLEX(*FULL) +
TEXT('Ethernet line') MAXCTL(128) THRESHOLD(*OFF) +
LINKSPEED(*MAX) COSTCNN(0) COSTBYTE(0) +
SECURITY(*NONSECURE) PRPDLY(*LAN) USRDFN1(128) +
USRDFN2(128) USRDFN3(128) AUTOCRTCTL(*YES) +
AUTODLTCTL(*NONE) CMNRCYLMT(2 5)


Rob Berendt





Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact