We have two LPARS, production and r&d.
Each LPAR has a 2-port 9055(5767) 10/100/1000 Base-TX Ethernet PCI Express Adapt
The first port only goes through the main corporate firewall.
The 2nd port also goes through a 2nd firewall for each partition.
Both LPARs configured the same.
Production is V6R1M1, R&D V7R1M0.
Each LPAR has two interfaces and two default routes.
Internet Subnet Line Line
Address Mask Description Type
10.5.2.5 255.255.248.0 ETHERLAN01 *ELAN
10.5.23.5 255.255.255.0 ETHERLAN02 *ELAN
Route Subnet Next Preferred
Destination Mask Hop Interface
*DFTROUTE *NONE 10.5.0.2 10.5.2.5
*DFTROUTE *NONE 10.5.23.254 10.5.23.5
R&D, both ports(IPS) work, no issue.
Production, first port always works, no issue.
Production, 2nd port works from some PCs with no issue, other PC inconsistent.
Our network/firewall/security staff confirmed all should working, they can production 2nd port without any issue.
They are stating it is a setting on the iSeries.
For the last few weeks I could not FTP to production 2nd port.
I rebooted PC, worked for a bit, today not working.
When it fails, I never get a FTP user log in screen.
Any thoughts from the group.
ftp 10.5.23.5
ftp>
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
http://www.pencor.com/
midrange.com
