Take a look at earlier messages on the archive site about IPv6.
----- Original Message -----
From: "Rubino, Jim" <Jim.Rubino@xxxxxxxx>
Sent: Tuesday, March 04, 2014 4:27 PM
Subject: Power7 tuning or analyzer
We have moved from a iSeries 520 to an LPar'd Power 7 E4C EPC5
It seems that this machine is slower than the machine we came from. We
were using 2 - 520's (one for Test and one for Production). Now the
Power7 is used for both machine or systems. Are there navigation tools
that we can use to see where the hang up is? Our IT department says
everything is set correctly. We have a DR machine that is replicating
both of these systems all day. The memory allocation is setup differently
than the 520 was and our IT department says that it does not matter on the
new Power7. On the old 520 we use to have pools for a couple of batch
and now we only have *Machine, *Base, *Interact and *Spool. *Machine is
FIXED and the others are *CALC on both systems.
Any help anyone can give me would be greatly appreciated.
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives