The very first thing I;d ask look at is how the resource is split up and
allocated between the two partitions.

What are the CPU and memory allocations of the Test and Production
partitions ?

On Wed, Mar 5, 2014 at 11:09 AM, Rubino, Jim <Jim.Rubino@xxxxxxxx> wrote:

We have moved from a iSeries 520 to an LPar'd Power 7 E4C EPC5
It seems that this machine is slower than the machine we came from. We
were using 2 - 520's (one for Test and one for Production). Now the Power7
is used for both machine or systems. Are there navigation tools that we
can use to see where the hang up is? Our IT department says everything is
set correctly. We have a DR machine that is replicating both of these
systems all day. The memory allocation is setup differently than the 520
was and our IT department says that it does not matter on the new Power7.
On the old 520 we use to have pools for a couple of batch and now we only
have *Machine, *Base, *Interact and *Spool. *Machine is FIXED and the
others are *CALC on both systems.

Any help anyone can give me would be greatly appreciated.

Jim Rubino
Fike Corporation

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives

This thread ...


Return to Archive home page | Return to MIDRANGE.COM home page