I have an HMC connected to the HMC port of a 520. But I am seeing no sign
that the HMC sees the 520 at all. Are there some basic instructions I can
follow to connect the HMC?
The service processor of the 520 is working to the extent that I can
connect a browser to it and login. Now I want to connect the HMC in order
to update the firmware of the 520.
The HMC is a standalone PC. When I login to it, it says the software is
On the HMC PC is a 5706 card. This card has 2 network ports. Currently I
have a network cable from one of the ports on the 5706 card to HMC1 on the
In the HMC config, under the "servers" tab I have created a server. The
name is "192.168.2.147". Which is also the IP address of that server. And
the IP address of the HMC1 port of the 520.
Since this HMC has 3 network ports, the 1 on the motherboard and the 2 on
the 5706 card, do I have to specify that the 192.168.2.147 server is using
one of these network ports? When I click on the server config I don't see
any prompt where I can change the network port it uses or the IP of the
server it connects to.
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact