MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » February 2014

Re: device could not be selected to be the load source...



fixed

Well off the top of my head the issue is that IBM i does not see any disk units. Do you have a virtual SCSI connection to the partition and disk created on IVM that is mapped to that connection?

- Larry "DrFranken" Bolhuis

www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com

On 2/6/2014 11:12 PM, bdapriv01 wrote:

Hi,

So I'm pulling my hair out on this one.

IVM:
$ ioslevel
2.2.3.1
$

I've got a IBM I partition, that I've just created. Total fresh install.

It boots, I get the language prompt, etc. I get to the main menu --- so I
know its seeing the ISO I supplied.

Whatever I give it - I get this error:

Install Licensed Internal Code - Error

Error:
A device could not be selected to be the load source.

Return to Dedicated Service Tools and run diagnostics
to determine why a device could not be selected.
Correct the problem and install the Licensed Internal Code
again.


Any idea how to trouble shoot this? The CD comes up under DST --


Work with Optical Devices

System: X
Type option, press Enter.

1=Select 2=Deselect 5=Display details



Resource Serial

Option Name Type Model Number Selected

OPT01 632C 002 00-00000 *





Any idea where to start? Driving me nuts.

Sean






Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact