RE: SST and QSECOFR

["Pete Massiello" <pmassiello-ml@xxxxxxxxxxxx>]

Jerry,

	It will just pop up on the Lan Console when you do a 21.  Really
this is no different than when you do an IPL and you see the IPL messages on
the console.  

	Pete

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jerry Adams
Sent: Wednesday, November 12, 2008 4:17 PM
To: Midrange Systems Technical Discussion
Subject: RE: SST and QSECOFR

Pete,

Sorry, I must have tripped out there for a minute. .-)

This is probably a silly question, but here goes anyway.  I set-up LAN
Console for our systems a month or so back (not HMC, Rob, but at least I'm
weeding out the twinax).  It has been eons since I had to go into DST, but
my recollection is that it just "popped up" on the system console (which was
twinax the last time I did this) when it was ready.  Just figured that, now,
it would "pop up" on the active LAN Console.  Right?  (See, I told you it
was silly.)

Jerry C. Adams
IBM System i Programmer/Analyst
B&W Wholesale
office: 615-995-7024
email:  jerry@xxxxxxxxxxxxxxx


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Massiello
Sent: Wednesday, November 12, 2008 12:53 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: SST and QSECOFR

You can only reset it to *DEFAULT.  You need to do a "21" and get into DST,
from there you should be able to change your password.  From your Security
settings in DST, you can't change a Disabled password.

	Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jerry Adams
Sent: Wednesday, November 12, 2008 10:54 AM
To: Midrange Systems Technical Discussion
Subject: RE: SST and QSECOFR

First, sounds like, when you ran the CHGDSTPWD command, you set the password
to QSECOFR - the default.  Try setting it to something else.  Remember that
in SST the password is case sensitive (bites my butt every time).

Second, this is why I have a second profile set up in SST with complete
authority.  When I boss (the PC guy) screws things up, I can go back and fix
them.

Jerry C. Adams
IBM System i Programmer/Analyst
B&W Wholesale
office: 615-995-7024
email:  jerry@xxxxxxxxxxxxxxx


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Dave Snyder
Sent: Wednesday, November 12, 2008 8:52 AM
To: midrange-l@xxxxxxxxxxxx
Subject: SST and QSECOFR

   I am having a problem with the SST signon for QSECOFR. I reset it using
   the CHGDSTPWD command, but when I go to change the password on the first
   signon (because password is expired), I get an error (CPF4AB7) that it
can
   not be changed:

    

   Cause . . . . . :   Your system is configured to prevent a service tools
   user 
     ID with a default and expired password from changing its own
   password.      

    

   How do I get around this. I do not know any other SST user ids or
   passwords.

    

   Thanks,

   Dave