×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
When you have AC3 installed on a system that you are doing a restore
on, you actually have to reinstall AC3 from the PID CDs in order for the
product to properly resynchronize. I have seen this required to be done if
you are using BRMS or not in your Save/Restore strategy.
Pete
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of David C. Shea
Sent: Wednesday, September 12, 2007 10:09 PM
To: Midrange Systems Technical Discussion
Subject: RE: Link Loader Failure and B600 0901 after v5r2 cume install
Rob:
Thanks for the OPT02 fix. Well done!
Re STRTCPSVR - not from the command line, from Navigator. No dice. I tried
from the command line, too. No dice.
I'll try reinstalling AC3.
Argh. This scratch recovery _almost_ worked.
Looking at the history log, I'm seeing complaints that SSL Telnet can't
start because either ac3 or DCM or DG1 are not installed. I'll uninstall
and reinstall all three.
Bummer.
****************************************************
Go...FASTER! Without an Upgrade!
ARCTOOLS/400(tm) and ReorgWizard(tm)
www.arctools.com
DCSoftware,Inc.
Ph: 508.435.8243 x200
Fax:508.435.4498
Current versions: ARCTOOLS v7.1.1, ReorgWizard v3.1.5, JDE Module v3, BPCS
Module v1
*****************************************************
-----Original Message-----
From: midrange-l-bounces+dshea=arctools.com@xxxxxxxxxxxx
[mailto:midrange-l-bounces+dshea=arctools.com@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Wednesday, September 12, 2007 7:46 PM
To: Midrange Systems Technical Discussion
Subject: RE: Link Loader Failure and B600 0901 after v5r2 cume install
WRKCFGSTS *DEV *OPT
Vary them off
1 - STRSST
1. Start a service tool
7. Hardware service manager
3. Locate resource by resource name
OPT01
3. Locate resource by resource name*htt
OPT02
Verify both exist (sort of)
3. Locate resource by resource name
OPT01
4=Remove
3. Locate resource by resource name
OPT02
2=Change detail
Rename it to OPT01
F3 like hell
WRKDEVD *OPT
Fix those
2 - Have you performed a STRTCPSVR SERVER(*HTTP) HTTPSVR(ADMIN)
Rob Berendt
As an Amazon Associate we earn from qualifying purchases.
This thread ...
RE: Link Loader Failure and B600 0901 after v5r2 cume install, (continued)
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact
[javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.