Re: rack config - items not showing

[Jerry Draper <midrangel@xxxxxxxxxxxxx>]

Will wonders never cease....

I ran it in 80 col mode and all the drives show up.

Jerry


Burns, Bryan wrote:
> Jerry,
> I had this problem on our old 620.  My expansion unit only showed up if I 
> printed the rack config 80 characters wide.
> Bryan Burns
> ECHO, Inc.
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Jerry Draper
> Sent: Friday, February 02, 2007 2:37 PM
> To: Midrange Systems Technical Discussion
> Subject: rack config - items not showing
>
>
> I have a small 9406-270 P05 with 18 35GB drives.  I go into SST, start a 
>   service tool, hardware service manager and press F6 to print a rack 
> config.
>
> Lo and behold it does not report the 7104 expansion unit nor the 7143 
> cage housing 12 drives.
>
> I thought the rack config was next to god in accuracy.
>
> What's up?
>
> Jerry