RE: Problem with connection between LPARS

Are you using AnyNet?

Regards,
 
Scott Ingvaldson
iSeries System Administrator
GuideOne Insurance Group
 

-----Original Message-----
date: Fri, 27 Jan 2006 10:19:18 -0700
from: Pete Helgren <Pete@xxxxxxxxxx>
subject: Re: Problem with connection between LPARS

Answers for all posts (thanks!):

Chris:  There are no errors on the target system.  Authority seems not 
to be an issue.

Michael: Yes.  The mode descriptions are the same.

And I guess I am not surprised by those findings since the SAVSYS on the

production side would have copied everything to the development side.

Rob: Hmmm.  The target system descriptions weren't in the directory or 
routing entries (since they were clones of the production system) and, 
more interesting, there aren't any *ANY entries for the development 
partition in the production side or vise a versa, yet the production 
side is still "finding" the development side.

I used CRTCTLAPPC when I created the controller description and it is 
identical, except the object name and description, to the controller on 
the production side.  If I vary off the controller on the production 
side I can no longer pass through to development so I know I have the 
right controller.  On the development side the device description is 
created automatically under the controller I created so I think I have 
that correct as well.

Pete
 

rob@xxxxxxxxx wrote:

>Those SNA error codes are fun, eh?
>Did you verify CFGDSTSRV options 1 & 2?
>Does WRKDIRE have a valid *ANY entry for the opposite system on each
lpar?
>You could try deleting the sna controller and device and see if they 
>autocreate.  I've done that.
>
>
>Rob Berendt


DISCLAIMER:
This message and accompanying documents are covered by the Electronic 
Communications Privacy Act, 18 U.S.C. ?? 2510-2521, and contains information 
intended for the specified individual(s) only. This information is 
confidential. If you are not the intended recipient or an agent responsible for 
delivering it to the intended recipient, you are hereby notified that you have 
received this document in error and that any review, dissemination, copying, or 
the taking of any action based on the contents of this information is strictly 
prohibited. If you have received this communication in error, please notify us 
immediately by e-mail, and delete the original message.