RE: Default to printer drawer 3 in WSCST requires rocket science

[daparnin@xxxxxxxxxxxxxxxxxx]

You may have to play with the values a bit so don't dismiss it as a
potential solution.  When you do a CHGSPLFA and specify a drawer does it
indeed pull from the correct drawer?  If it doesn't pull from the selected
drawer there may be other factors at work.  You might also save some time
by calling IBM and getting their help.

Dave Parnin
Nishikawa Standard Company
Topeka, IN  46571
daparnin@xxxxxxxxxxxxxxxxxx




                                                                                
                                 
                      Dan Bale                                                  
                                 
                      <dbale@xxxxxxxxxxxxx        To:       Midrange Systems 
Technical Discussion                
                      >                            
<midrange-l@xxxxxxxxxxxx>@SMTP@CTB                            
                      Sent by:                    cc:       (bcc: David A 
Parnin/Topeka/NISCO/SPCO)              
                      midrange-l-bounces@m        Subject:  RE: Default to 
printer drawer 3 in WSCST requires    
                      idrange.com                  rocket science               
                                 
                                                                                
                                 
                                                                                
                                 
                      10/22/2004 12:28 PM                                       
                                 
                      Please respond to                                         
                                 
                      Midrange Systems                                          
                                 
                      Technical Discussion                                      
                                 
                      <midrange-l@midrange                                      
                                 
                      .com>                                                     
                                 
                                                                                
                                 
                                                                                
                                 



Interesting.  I tried this, but no change.

Thanks for suggesting, Dave.

db

> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx / daparnin@xxxxxxxxxxxxxxxxxx
> Sent: Friday, October 22, 2004 12:04 PM
>
> Fear not, it is possible and you are on the right track.  I went through
> the same confusion awhile back when I wanted to set up our
> networked copier
> as a printer.  It was always pulling from drawer #1 but I wanted drawer
#3
> which was high capacity.
>
> There may be a better way but I believe what I ended up doing was
changing
> the value of the data on the DWRSLT.  In my case DRAWER#2 corresponded to
> the 3rd physical drawer so I just took the value of the DATA line and
> assigned it to the PAPER and DRAWER1 entries.  Then just create the WCST
> object and reference it in the WSCST attribute of the remote output
queue.
>
> :DWRSLT
>   DRAWER=PAPER
>   DATA ='1B266C3748'X.
> :DWRSLT
>   DRAWER=ENVELOPE
>   DATA ='1B266C3668314F'X.
> :DWRSLT
>   DRAWER=DRAWER1
>   DATA ='1B266C3748'X.
> :DWRSLT
>   DRAWER=DRAWER2
>   DATA ='1B266C3448'X.
>
>
> Dave Parnin
> Nishikawa Standard Company
> Topeka, IN  46571
> daparnin@xxxxxxxxxxxxxxxxxx

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.