RE: Default to printer drawer 3 in WSCST requires rocket science

["Ed Murphy" <EMurphy@xxxxxxxxxxxxx>]

When I set up a HP5si on the network I had to set the default drawer
setting on the printer it self.
 Check Tray priority in the manual you downloaded

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Dan Bale
Sent: Friday, October 22, 2004 11:06 AM
To: Midrange Systems Technical Discussion
Subject: RE: Default to printer drawer 3 in WSCST requires rocket
science

Savin has a web site, found our device, the printer manual makes no
mention whatsoever of ASCII control sequences.

> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx / Dan Bale
> Sent: Friday, October 22, 2004 11:52 AM
>
> Printer's manual?  What printer's manual?  :-(
>
> I will have to see if Savin has a web site...
<snip>

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.




NOTICE: This electronic mail message and any files transmitted with it are 
intended exclusively for the individual or entity to which it is addressed. The 
message, together with any attachment, may contain confidential and/or 
privileged information. Any unauthorized review, use, printing, saving, 
copying, disclosure or distribution is strictly prohibited. If you have 
received this message in error, please immediately advise the sender by reply 
email and delete all copies.