× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Well, perhaps the bigger problem is that one of the new drives failed.  Fix
that, and maybe the RAID-5 comes back.

- Dan Bale
(I am *NOT* "Dale"
http://archive.midrange.com/midrange-l/200105/msg00281.html )

Chris Beck wrote:

We talked to the PE and he said that as long as there was the same model
drive in the same position it should work with parity running, so we took
the rack config from before and after, and swapped a few drives around to
make it match. The 2 CE's and a Ex CE here were curious to see if this would
work.   And it did not.

So we took AL's advice and stopped RAID-5.  We then started the Restore, and
when this finished it came back to DST and RAID-5 was not going.  So as the
book says we did a IPL to manual mode, and never came back up because one of
the new drives failed during the  IPL.

Should RAID have been restarted automatically by the restore storage?

Chris



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.