Re: Automating SNDNETF and RCVNETF

Thank you for the inspirational message.  It was just what I wanted to hear,
now that I got IBM Support involved.  I spend serveral hours on friday to
find some missing pieces and a PTF to apply.  Luckily (I hope), since both
boxes are on the same release, I will not have the same results.  I would
really like to run the SAVRSTLIB & SAVRSTOBJ.  It would make things a whole
like easier to automate.

If not and I need to use RCVNETF, how did I monitor the message queue for a
profile of XFER id.  Will I need a never end program or can't I use some
auto-answer or trigger to kick off the CLP needed to do the RCVNETF and
RSTLIB?

Eurrat

-----Original Message-----
From: Lemen, George (Contractor) <george.lemen@weyerhaeuser.com>
To: 'Midrange-L' <MIDRANGE-L@midrange.com>
Date: Saturday, April 01, 2000 5:33 PM
Subject: Re: Automating SNDNETF and RCVNETF


>For what it is worth:
>I have seen the error codes mentioned in the attached note when using
>ObjectConnect:
>* When I first set up ObjectConnect between a system at V4R2 and V3R2
>(this was a while back as you can imagine). The fix was a PTF on V3R2 (it
>was listed in the V4R2 PSP).
>* Between V4R4 and V4R2 (I've just run into this one). I assume I have
>another PTF to locate and install (I do have the PTF for ObjectConnect in
>the V4R4 PSP installed on the V4R2 box).
>In both of the above cases I used SNDNETF/RCVNETF with save files to get
the
>job done.
>
>I also had a nuisance problem when I set up ObjectConnect on our new V4R4
>box and out old V3R2 system during our recently completed side-by-side
>migration. I got unexpected messages at the system operators console on the
>V3R2 system when whenever SAVRSTOBJ was used to or from the V3R2 system
(but
>the object was moved successfully). We installed several PTF's on both
>systems to no avail.  Rochester support had a list of version to version
>specific PTF's that are not on the CUME or HIPER that were installed, but
>did not resolve the problem. Despite numerous traces and conversations with
>Rochester development we reached the point where we shut down the old
system
>before a fix was worked out, so as far as I know that problem still exists.
>
>
>********************************* (Original note)
>*******************************
>Date: Fri, 31 Mar 2000 10:11:02 -0600
>From: "Jim Oberholtzer/Computech" <joberhol@compures.com>
>Subject: Re: Automating SNDNETF and RCVNETF
>
><*snip>
>4 > SAVRSTLIB LIB(LNOTES) RMTLOCNAME(S104N5GM)
>    ObjectConnect/400 internal error, function code 03, return code 04.
>    An error occurred during the SAVRSTLIB operation.
><endsnip>
>
>At first glance, I wonder if distribution services is set up on both boxes.
>If the SNDNETF works, then this option should as well.  Do you have the
>options installed on both boxes  (on another message this was correctly
>identified as option 22 of OS/400)?  I suspect that if you look at the
>distribution queue messages you will get better information about why this
>did not work.
>
>Jim
>***************
>George Lemen
>Sr. Project Analyst, CIBER Inc.
>Weyerhaeuser CER Operations Manager
>Weyerhaeuser phone: (253) 924-7648; E-mail: George.Lemen@Weyerhaeuser.com
>CIBER phone and voice mail: (425) 451-2575 extension 142; E-mail:
>glemen@ciber.com
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---
>

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---