|
midrange.com
No Roger,
My UserID and Password on the Network is entirely different with that of
AS/400, and about others, some has the same ID but not all.
And Yes, Qmaxsign value is set to *NOMAX. Should I change?
Ravi
-----Original Message-----
From: Roger Boucher [SMTP:RBoucher@stanpac.com]
Sent: Tuesday, December 21, 1999 10:17 PM
To: 'MIDRANGE-L@midrange.com'
Subject: RE: Mapping problem in V4R4 Express CA
I bet your userid and password are the same on the Network and the
AS/400,
right?
And I bet theirs are not, right?
And I bet your QMAXSIGN system value is set to *NOMAX, right?
Roger Boucher
Standard Pacific Corp.
rboucher@stanpac.com
714-668-4326
-----Original Message-----
From: Jaladi Ravi Kiran, Gurgaon [mailto:jaladirk@ggn.hcltech.com]
Sent: Saturday, December 18, 1999 1:14 AM
To: MIDRANGE-L@midrange.com
Subject: Mapping problem in V4R4 Express CA
Hello pete,
Yes, its accepting the Windows logon password.
But, its accepting only my User ID and Password and not the Users's
individual ID ,what they had in the Network.
I tried with their personal logon ID of the user on their respec..
PC's and
it gives "Password Incorrect. Try again" so, I tried logon with my
user ID
and password and tried accessing the Netserver and it went through
with out
any problem and it has not even asked for the password.
I don't understand why its' allowing only my user ID for Accessing
this
Netserver. My user on As/400 is having *SECADM user class and rest
all
users's is having *PGMR class. Does they require any special
authorities?
I can not ask others to use my ID and Password to logon into the
network
from their PC's every time when they want to access the Netserver
folder,
could you please tell me where am doing the mistake.
And the Second issue is after mapping to the corresponding folder,
and
giving this in the Startup Defaults of the IBM Reader, out of some
100
shelves available in that folder I can only see 20 shelves from the
IBM Book
Reader. Why is it so? What should I do for listing/viewing all the
shelves .
Can U please help me in solving these two issues.
Thanks
Ravi
-----Original Message-----
From: Pete Massiello [SMTP:pmassiello@os-solutions.com]
Sent: Friday, December 17, 1999 7:19 PM
To: MIDRANGE-L@midrange.com
Subject: Re: Mapping problem in V4R4 Express CA
Its your passwords. Netserver (a windows function) uses the
windows
password that you
logon to your PC with, if that is not the same as what the
AS/400 is
expecting, then
you are probably getting the problems that you both
describe.
HTH
Pete Massiello
Carl Gerlach wrote:
> I've been having the exact same problem. 3 of the AS/400's
are
v4r3m0 and 1
> is v4r4m0. One of the AS/400's works fine with Express
Client, but
the other
> 3 don't. (The one that works is not the v4r4m0 machine.)
I've
looked
> everywhere for info. I even tried the Guest User but to no
avail.
>
> I hope someone has an explanation or suggestion.
>
> Just thought I'd let you know you're not alone
>
> Carl H. Gerlach
> Apex Information Systems Group
> cgerlach@apex-isg.com
> http://www.apex-isg.com
> 888-400-9725
> Fax: 414-744-9242
>
> -----Original Message-----
> From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]
> On Behalf Of Jaladi Ravi Kiran, Gurgaon
> Sent: Friday, December 17, 1999 4:49 AM
> To: MIDRANGE-L@midrange.com
> Subject: Mapping problem in V4R4 Express CA
>
> Hi,
>
> Am facing the problem of Mapping to the shared folders
that are
available in
> the NetServer.I could see the NetServer in my network but
when I
click on it
> , it asks for the Password, Previously when I first try to
install
this I
> faced this Problem and later it was rectified after giving
the
Guest user
> profile name in the Advance Option of NetServer
Properties. At
that time I
> just checked this in 2 to 3 Pc's and it was working fine.
>
> But today when I was trying to setup in rest of the PC's (
try to
map the
> Folder 'Books' on as/400 for using the IBM Book manager)
it's
asks for the
> "supply of the Password" the window it asks, shows the
Netserver
as
> "Resource : //Netserver name/IPC$ " and below this
Password
prompt.
>
> And the interesting thing is, From my PC and some other PC
in
which I had
> configured earlier can able to map the netserver and also
shows
the Folders
> inside it when I double Click the NetServer.
>
> Can any one help me what's the Problem with the Rest of
the PC's.
I had
> checked the TCP/IP properties of the PC's that with the
Working
PC's (my PC)
> everything seems to be OK.
>
> Has anyone faced this problem? Please give me some help.
>
> Yours truly,
> Ravi
>
>
------------------------------------------------------------------------
> Name: winmail.dat
> winmail.dat Type: Text Document
(application/x-unknown-content-type-txtfile)
> Encoding: base64
--
Pete Massiello
OS Solutions International
Phone: (203)-744-7854 Ext 11.
http://www.os-solutions.com
mailto:pmassiello@os-solutions.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to
MIDRANGE-L@midrange.com.
| To subscribe to this list send email to
MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to
MIDRANGE-L@midrange.com.
| To subscribe to this list send email to
MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to
MIDRANGE-L@midrange.com.
| To subscribe to this list send email to
MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
