RE: Code Editor Command Shell (F9)

Hey Thank you for responding.  I have tried to end the command shell as you
have suggested and found that did not work either.  I am unable to get any
functionality out of the command shell.  I am using the STRCODE from of
communications in APPC network type.  The job log on the AS/400 does not
show me anything that indicates an error, but I am getting a large number of
errors showing up in the EVDCERRS.LOG.  Actually the log has grown to be
approx. 148 megs.  The most frequent error showing in there is as follows:

EVFCTCPD.EXE Thu Jan 20 15:17:21 2000 DownloadUserSpace:QUSRUSAT:Error
retrieveing attributes CPF9801.


Here is what is showing up in my AS/400 job log while the STRCODE command is
running:

STRCODE RMTLOCNAME(P0101C03) CMNTYPE(*APPC)

The job's CCSID value is changed from 65535 to 00037 while the STRCODE
 command is active
Default information for STRCODE retrieved successfully
Device changed in file EVFCICFF in library ETBLIB
Not authorized to access document QPTFIDX in folder QCODE400
Not authorized to access document QPTFIDX in folder QVRPG
Not authorized to access document QPTFIDX in folder QADTSCS
Your STRCODE  defaults have not been updated.  STRCODE defaults can not be
  created or updated in library *NONE.


It seems that in a lot of cases when I do try to do anything in the code
editor or Code Project...etc.  The CODE Daemon is automatically starting.
Can this be disabled in these applications or what might be going on?  On a
side note, what is VCOM? 

Please let me know if this is making any more sense.

Thanks Ed Buckingham

> -----Original Message-----
> From: Scott Johnson [SMTP:sjohnson@highsmith.com]
> Sent: Thursday, February 10, 2000 6:03 PM
> To:   CODE400-L@midrange.com
> Subject:      Re: Code Editor Command Shell (F9)
> 
> Ed,
> 
> I am not sure how to help you on the unable to do any command processing
> from within the Command Shell.  Need more information.  What kind of
> errors are you getting?  Are you use STRCODE or VCOM?  If STRCODE what
> does the Joblog for that session say?  If VCOM, is there anything in the
> FVDCERRS.LOG file?
> 
> For the error messages, you are not shutting down the Command Shell
> properly.
> It is like the MS-DOS Prompt window, it has to be shut down properly to
> avoid the error messages.  Try this in the Command Shell: Right click
> in the window and select Local.  Then type Exit and press enter.  The
> Command Shell should now shut down gracefully. 
> 
> -- 
> ------------------------------------------------------
> Scott P. Johnson
> Microcomputer Development Specialist
> IBM Certified Specialist - AS/400 RPG Programmer
> Highsmith Inc.
> W5527 Hwy 106, PO BOX 800
> Fort Atkinson, WI 53538-0800
> TEL:  920-563-9571                FAX:  920-563-7395
> sjohnson@highsmith.com
> www.highsmith.com
> ------------------------------------------------------
> 
> "Buckingham, Ed" wrote:
> > 
> > I am using the CODE/400 Code Editor (OS400 = V4R2M0, CODE/400 = V3R2M2,
> > service pack = SP002, and OS = WIN98) and I am having a problem with the
> F9
> > Command Shell function.  I am having two types of problems.  First I am
> > unable to do any command processing from this window within the editor
> for
> > both Local and OS400 type commands.  The second problem is when I try to
> > exit the Code editor and the Command Shell (F9) has been used, I am
> unable
> > to exit completely.  I get two messages they are as follows:
> > 
> > The first is the normal message:
> > 
> > CODE - EVF9452W - Warning
> > 
> >         This session may contain an active program.  Do you want to
> close
> > the session without saving your data?
> > 
> > 
> >                                         YES                     NO
> > 
> > The second message occurs when you hit YES on the above message:
> > 
> > CODE - EVF9453W - Warning
> > 
> >         The command shell process will not shut down.  Do you want to
> close
> > the session without waiting?
> > 
> >                                         YES                     NO
> > 
> > This results in a program being left open when you do a ctrl-alt-delete.
> > The program that is left open is EVFWSP40.  This function was working at
> one
> > point when the package was first loaded on to my system.  Since the
> problem
> > has surfaced I have reinstalled the CODE/400 package and WINDOWS 98. If
> > anyone has had this problem in the past, please let me know how it was
> > corrected.  Any guidance on this subject would be a great help.  Thanks!
> > 
> > Ed Buckingham
> >
> +---
> | This is the CODE/400 Mailing List!
> | To submit a new message, send your mail to CODE400-L@midrange.com.
> | To subscribe to this list send email to CODE400-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> CODE400-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: larry@paque.net
> +---
+---
| This is the CODE/400 Mailing List!
| To submit a new message, send your mail to CODE400-L@midrange.com.
| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: larry@paque.net
+---