|
I am trying to connect an iSeries 515 to the internet and would like
some guidance. This is my first try at this side of things after 20
years of programming on the midrange. I am signed on to the i5
using the System Console attached to the T6 port.
1. I have a static IP address from my ISP.
2. I configured the ethernet line on the iSeries (defined to use the T5 port).
3. I setup the TCP/IP interfaces as follows:
Internet Address SubNet Line Desc Line Type
74.219.167.174 255.255.255.252 ETHLIN *ELAN
127.0.0.1 255.0.0.0 *LOOPBACK *NONE
4. I setup the TCP/IP Routes
Destination Mask Next Hop Interface
*DFTROUTE *NONE 74.219.167.174 *NONE
5. Setup the TCP/IP host table entries
Internet address Host Name
74.219.167.174 S1048D02
DDMSONLINE
DDMSONLINE.COM
127.0.0.1 LOOPBACK
LOCALHOST
6. Changed TCP/IP Domain
Host name: DDMSONLINE
Domain Name: DDMSONLINE.COM
DNS Internet address: 65.24.0.168
65.24.0.169
7. I plugged the i5 into the internet modem / router
8. Started TCP/IP and the TCP/IP server
When I try to PING the domain name DDMSONLINE.com it says:
Verifying connection to host system S1048D02 at address 74.219.167.174
Cannot reach remote system
Where do I go from here?
Thanks in advance...
Rich..
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.