Re: CRTRPGMOD: CPYSRCF: From-file EVFEVENT in KS01TS0O not allowed. -- WDSCI-L

That is strange. After I change the save behavior to "Save directly to
original member" the error vanished. Now that I changed it back to "Save
to a temporary member and ..." the error is back again, but does not
happen as often as before.

I am not sure for what this option is good for. But I assume that the risk
of half-uploaded source members is less with "Save to a temporary member
..." than with the other option. That is why I tend to use a temporary
member.

But what I really do not understand is that this option also affects the
way RDi manages the EVFEVENT file, which actually is created by the
compiler. For my understanding RDi does not need to upload anything to
this file but just get the results of the compile jobs from it.

Thomas.

dsci-l-bounces@xxxxxxxxxxxx schrieb am 15.01.2014 16:01:10:

Von: PaulBailey@xxxxxxxxxx
An: wdsci-l@xxxxxxxxxxxx,
Datum: 15.01.2014 16:04
Betreff: Re: [WDSCI-L] CRTRPGMOD: CPYSRCF: From-file EVFEVENT in
KS01TS0O not allowed.
Gesendet von: wdsci-l-bounces@xxxxxxxxxxxx

Maybe our problems weren't the same, then.

Have you tried the advice in the error log? "If this problem
persists you can change the member save behavior on the Remote
Systems IBM i > Objects Subsystem preference page and then try saving

again."

-Paul.

-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx [mailto:wdsci-l-bounces@xxxxxxxxxxxx
] On Behalf Of thomas.raddatz@xxxxxx
Sent: 15 January 2014 14:47
To: wdsci-l@xxxxxxxxxxxx
Subject: Re: [WDSCI-L] CRTRPGMOD: CPYSRCF: From-file EVFEVENT in
KS01TS0O not allowed.

w

Hi Paul,

I carefully followed your clean and detailed instructions, but it
did not solve the problem.

I added the "-clean" option and restarted RDi. Then I closed all
open editors, cleared both caches and restarted RDi again. The first
bunch of modules compiled just fine, but with the second attempt,
the error reappeared.

Thomas.

wdsci-l-bounces@xxxxxxxxxxxx schrieb am 15.01.2014 15:20:00:

Von: PaulBailey@xxxxxxxxxx
An: wdsci-l@xxxxxxxxxxxx,
Datum: 15.01.2014 15:20
Betreff: Re: [WDSCI-L] CRTRPGMOD: CPYSRCF: From-file EVFEVENT in
KS01TS0O not allowed.
Gesendet von: wdsci-l-bounces@xxxxxxxxxxxx

Hi Thomas,

I had similar problems a few weeks ago, but I cleaned the workspace
and cache files and I have not had the problem since.

To clean the workspace, close RDi, copy your windows shortcut for RDi
to the windows desktop. Right-click the copy, select "properties",
select the "Shortcut" tab. In the "Target" edit box, put -clean at the
very end of the target (e.g. "C:\IBM\SDP \eclipse.exe -product
com.ibm.rational.developer.ibmi.product.ide - clean"). Click OK, then
double-click the shortcut you've just changed.

To clean the cache files, make certain RDi is open, and all edit
windows (e.g. for source members) are closed. Go to the Window menu
and select the "Preferences" menu option. Type "cache" into the edit
box at the top-left of the preferences window. The list on the left is
reduced and you should have two cache options under "Remote Systems".
Click the first ("File Cache") and then click the "Clear Cached Files"
button. It takes a minute or two to complete. Then click the "cache"
option on the left (under "IBM i") and click the "Clear Cache" button.
Close RDi and restartit, maybe using the clean option you created
above.

Hopefully the above isn't too unclear. If this doesn't work for you
then post to the WDSCi-L list again.

-Paul.

-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx
[mailto:wdsci-l-bounces@xxxxxxxxxxxx
] On Behalf Of thomas.raddatz@xxxxxx
Sent: 15 January 2014 13:43
To: wdsci-l@xxxxxxxxxxxx
Subject: Re: [WDSCI-L] CRTRPGMOD: CPYSRCF: From-file EVFEVENT in
KS01TS0O not allowed.

I forgot to mention that EVFEVENT.BASE64 is created and populated
despite of the error message.

Thomas.

wdsci-l-bounces@xxxxxxxxxxxx schrieb am 15.01.2014 14:37:31:

Von: thomas.raddatz@xxxxxx
An: WDSCI-L@xxxxxxxxxxxx,
Datum: 15.01.2014 14:37
Betreff: [WDSCI-L] CRTRPGMOD: CPYSRCF: From-file EVFEVENT in
KS01TS0O not allowed.
Gesendet von: wdsci-l-bounces@xxxxxxxxxxxx

Hi,

Ocassionally I get the following error message when I compile a RPG
modules from the RSE:

<errorMessage>
Member /QSYS.LIB/LIBHTTP.LIB/EVFEVENT.FILE/BASE64R4 could not be
saved successfully because an attempt to copy temporary member
/QSYS.LIB/LIBHTTP.LIB/EVFEVENT.FILE/RSE8791045 to source member
/QSYS.LIB/LIBHTTP.LIB/EVFEVENT.FILE/BASE64R4 failed. Check the
allow-write or allow-update flags for source file
/QSYS.LIB/LIBHTTP.LIB/EVFEVENT.FILE are set to *YES. Also make sure
file

member /QSYS.LIB/LIBHTTP.LIB/EVFEVENT.FILE/BASE64R4 is not locked by
another job. During a save, the Remote Systems LPEX Editor first
creates

a temporary member, uploads the changes to the temporary member and
then

copies the temporary member over the original member if the upload
was successful. The temporary member is then deleted. If this
problem persists you can change the member save behavior on the
Remote Systems

IBM i > Objects Subsystem preference page and then try saving again.
Below is the message returned from the server when attempting to run
the

CPYSRCF command:

From-file EVFEVENT in LIBHTTP not allowed.
</errorMessage>

I can safely bet on that message when I compile a bunch of modules
from the RSE.

The "Commands Log" does not show anything special:

<commandsLog>
CRTRPGMOD MODULE(LIBHTTP/BASE64R4) SRCFILE(LIBHTTP/QRPGLESRC)
SRCMBR(BASE64R4) REPLACE(*YES) OPTION(*EVENTF) DBGVIEW(*SOURCE)
Ownership of object BASE64R4 in LIBHTTP type MODULE changed.
Cause . . . . . : The ownership of object BASE64R4 in library
LIBHTTP type MODULE has changed.
AUT parameter ignored.
Cause . . . . . : The AUT parameter value was ignored because
REPLACE(*YES) was specified. Therefore, the existing object was
used as the source of authority. All private and public authorities
were copied from the existing object to new object BASE64R4 type
*MODULE in library LIBHTTP. Recovery . . . : Display the object
authority (DSPOBJAUT command) to determine if the authority for
object
BASE64R4 type *MODULE in library LIBHTTP needs to be changed.
Grant object authority (GRTOBJAUT command) or revoke object
authority (RVKOBJAUT command) to change the authority for object
BASE64R4 type *MODULE in library LIBHTTP if needed.

Replaced object BASE64R4 type *MODULE was moved to QRPLOBJ.
Cause . . . . . : Replaced object BASE64R4 type *MODULE from
the LIBHTTP library was renamed to Q4C06DA2AD and moved to the
QRPLOBJ library. Recovery . . . : If the replaced object is
needed, you can use the Move Object (MOVOBJ) command to move the
object from the QRPLOBJ library into another library. The QRPLOBJ
library is cleared during the next initial program load (IPL) of the
system. The QRPLxxxxx library (where 'xxxxx' is the number of a
primary auxiliary storage pool (ASP)) is cleared during the next
vary on of the ASP device.

Module BASE64R4 placed in library LIBHTTP. 00 highest severity.
Created on 15.01.14 at 14:15:43.
Cause . . . . . : Module BASE64R4 was successfully created in
library LIBHTTP. The highest message severity that resulted was 00.
The module creation date and time are 15.01.14 and 14:15:43.

CRTRPGMOD MODULE(LIBHTTP/CCSIDR4) SRCFILE(LIBHTTP/QRPGLESRC)
SRCMBR(CCSIDR4) REPLACE(*YES) OPTION(*EVENTF) DBGVIEW(*SOURCE)
Ownership of object CCSIDR4 in LIBHTTP type MODULE changed.
Cause . . . . . : The ownership of object CCSIDR4 in library
LIBHTTP type MODULE has changed.
AUT parameter ignored.
Cause . . . . . : The AUT parameter value was ignored because
REPLACE(*YES) was specified. Therefore, the existing object was
used as the source of authority. All private and public authorities
were copied from the existing object to new object CCSIDR4 type
*MODULE in library LIBHTTP. Recovery . . . : Display the object
authority (DSPOBJAUT command) to determine if the authority for
object
CCSIDR4 type *MODULE in library LIBHTTP needs to be changed.
Grant object authority (GRTOBJAUT command) or revoke object
authority (RVKOBJAUT command) to change the authority for object
CCSIDR4 type *MODULE in library LIBHTTP if needed.

Replaced object CCSIDR4 type *MODULE was moved to QRPLOBJ.
Cause . . . . . : Replaced object CCSIDR4 type *MODULE from
the LIBHTTP library was renamed to Q4C06DA41C and moved to the
QRPLOBJ library. Recovery . . . : If the replaced object is
needed, you can use the Move Object (MOVOBJ) command to move the
object from the QRPLOBJ library into another library. The QRPLOBJ
library is cleared during the next initial program load (IPL) of the
system. The QRPLxxxxx library (where 'xxxxx' is the number of a
primary auxiliary storage pool (ASP)) is cleared during the next
vary on of the ASP device.

Module CCSIDR4 placed in library LIBHTTP. 00 highest severity.
Created on 15.01.14 at 14:15:43.
Cause . . . . . : Module CCSIDR4 was successfully created in
library LIBHTTP. The highest message severity that resulted was 00.
The module creation date and time are 15.01.14 and 14:15:43.

CRTRPGMOD MODULE(LIBHTTP/COMMSSLR4) SRCFILE(LIBHTTP/QRPGLESRC)
SRCMBR(COMMSSLR4) REPLACE(*YES) OPTION(*EVENTF) DBGVIEW(*SOURCE)
Ownership of object COMMSSLR4 in LIBHTTP type MODULE changed.
Cause . . . . . : The ownership of object COMMSSLR4 in library
LIBHTTP type MODULE has changed.
AUT parameter ignored.
Cause . . . . . : The AUT parameter value was ignored because
REPLACE(*YES) was specified. Therefore, the existing object was
used as the source of authority. All private and public authorities
were copied from the existing object to new object COMMSSLR4 type
*MODULE in library LIBHTTP. Recovery . . . : Display the object
authority (DSPOBJAUT command) to determine if the authority for
object
COMMSSLR4 type *MODULE in library LIBHTTP needs to be changed.
Grant object authority (GRTOBJAUT command) or revoke object
authority (RVKOBJAUT command) to change the authority for object
COMMSSLR4 type *MODULE in library LIBHTTP if needed.

Replaced object COMMSSLR4 type *MODULE was moved to QRPLOBJ.
Cause . . . . . : Replaced object COMMSSLR4 type *MODULE from
the LIBHTTP library was renamed to Q4C06DA662 and moved to the
QRPLOBJ library. Recovery . . . : If the replaced object is
needed, you can use the Move Object (MOVOBJ) command to move the
object from the QRPLOBJ library into another library. The QRPLOBJ
library is cleared during the next initial program load (IPL) of the
system. The QRPLxxxxx library (where 'xxxxx' is the number of a
primary auxiliary storage pool (ASP)) is cleared during the next
vary on of the ASP device.

Module COMMSSLR4 placed in library LIBHTTP. 00 highest severity.
Created on 15.01.14 at 14:15:44.
Cause . . . . . : Module COMMSSLR4 was successfully created in
library LIBHTTP. The highest message severity that resulted was 00.
The module creation date and time are 15.01.14 and 14:15:44.

CRTRPGMOD MODULE(LIBHTTP/COMMTCPR4) SRCFILE(LIBHTTP/QRPGLESRC)
SRCMBR(COMMTCPR4) REPLACE(*YES) OPTION(*EVENTF) DBGVIEW(*SOURCE)
Ownership of object COMMTCPR4 in LIBHTTP type MODULE changed.
Cause . . . . . : The ownership of object COMMTCPR4 in library
LIBHTTP type MODULE has changed.
AUT parameter ignored.
Cause . . . . . : The AUT parameter value was ignored because
REPLACE(*YES) was specified. Therefore, the existing object was
used as the source of authority. All private and public authorities
were copied from the existing object to new object COMMTCPR4 type
*MODULE in library LIBHTTP. Recovery . . . : Display the object
authority (DSPOBJAUT command) to determine if the authority for
object
COMMTCPR4 type *MODULE in library LIBHTTP needs to be changed.
Grant object authority (GRTOBJAUT command) or revoke object
authority (RVKOBJAUT command) to change the authority for object
COMMTCPR4 type *MODULE in library LIBHTTP if needed.

Replaced object COMMTCPR4 type *MODULE was moved to QRPLOBJ.
Cause . . . . . : Replaced object COMMTCPR4 type *MODULE from
the LIBHTTP library was renamed to Q4C06DA89B and moved to the
QRPLOBJ library. Recovery . . . : If the replaced object is
needed, you can use the Move Object (MOVOBJ) command to move the
object from the QRPLOBJ library into another library. The QRPLOBJ
library is cleared during the next initial program load (IPL) of the
system. The QRPLxxxxx library (where 'xxxxx' is the number of a
primary auxiliary storage pool (ASP)) is cleared during the next
vary on of the ASP device.

Module COMMTCPR4 placed in library LIBHTTP. 00 highest severity.
Created on 15.01.14 at 14:15:45.
Cause . . . . . : Module COMMTCPR4 was successfully created in
library LIBHTTP. The highest message severity that resulted was 00.
The module creation date and time are 15.01.14 and 14:15:45.
</commandsLog>

But the Eclipse error contains the error message:

<errorLog>

!ENTRY org.eclipse.rse.ui 4 0 2014-01-15 14:15:46.308 !MESSAGE Error
uploading member !STACK 0

org.eclipse.rse.services.clientserver.messages.SystemMessageException:

Save failed. Could not copy temporary member
/QSYS.LIB/LIBHTTP.LIB/EVFEVENT.FILE/RSE8791045 to member
/QSYS.LIB/LIBHTTP.LIB/EVFEVENT.FILE/BASE64R4.
at
com.ibm.etools.iseries.rse.ui.resources.TemporaryQSYSMember.copyToMe
mb
er
(TemporaryQSYSMember.java:200)
at

com.ibm.etools.iseries.rse.ui.resources.QSYSEditableRemoteSourceFileMember.upload

(QSYSEditableRemoteSourceFileMember.java:1042)
at
com.ibm.etools.iseries.rse.ui.resources.QSYSTempFileListener.upload
(QSYSTempFileListener.java:354)
at

com.ibm.etools.iseries.rse.ui.resources.QSYSTempFileListener.doResourceSynchronization

(QSYSTempFileListener.java:97)
at

org.eclipse.rse.files.ui.resources.SystemTempFileListener.synchronizeTempWithRemote

(SystemTempFileListener.java:718)
at
org.eclipse.rse.files.ui.resources.SystemTempFileListener
$SynchResourcesJob.run(SystemTempFileListener.java:313)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)

!ENTRY org.eclipse.rse.ui 4 0 2014-01-15 14:15:46.316 !MESSAGE
EVFF5037 </errorLog>

Although an object lock could be the reason for the problem, I
wonder

why

the content of the EVFEVENT/RSE8791045 member of file EVFEVENT is
different from member EVFEVENT/BASE64R4:

<RSE8791045> (stripped to 70 columns)
*...+....1....+....2....+....3....+....4....+....5....+....6....+...
.7 000000140115TIMESTAMP 0 20140115141543 000000140115PROCESSOR 0
000 1
000000140115FILEID 0 001 000000 027 LIBHTTP/QRPGLESRC(BASE64R4)

000000140115FILEID 0 002 000046 027 LIBHTTP/QRPGLESRC(BASE64_H)

000000140115FILEEND 0 002 000082
000000140115ERROR 0 001 1 000052 000052 007 000052 021 RNF7031

000000140115ERROR 0 001 1 000060 000060 007 000060 021 RNF7031

000000140115ERROR 0 001 1 000353 000353 007 000353 021 RNF7031

000000140115ERROR 0 001 1 000354 000354 007 000354 021 RNF7031

000000140115FILEEND 0 001 000384
****** END OF DATA ****** </RSE8791045>

<BASE64R4> (stripped to 70 columns)
*...+....1....+....2....+....3....+....4....+....5....+....6....+...
.7
TIMESTAMP 0 20140115141543
PROCESSOR 0 000 1
FILEID 0 001 000000 027 LIBHTTP/QRPGLESRC(BASE64R4)

20131220081027

FILEID 0 002 000046 027 LIBHTTP/QRPGLESRC(BASE64_H)

20131220081054

FILEEND 0 002 000082
ERROR 0 001 1 000052 000052 007 000052 021 RNF7031 I 00 051 The

ERROR 0 001 1 000060 000060 007 000060 021 RNF7031 I 00 051 The

ERROR 0 001 1 000353 000353 007 000353 021 RNF7031 I 00 050 The

ERROR 0 001 1 000354 000354 007 000354 021 RNF7031 I 00 051 The

FILEEND 0 001 000384
</BASE64R4>

Same content, but RSE8791045 is a source file format.

Last but not least it does not matter from what view I compile the
modules:

- RSE Tree View
- Object Table View
- TurnOver Worklist View

All your comments would be greatly appreciated.

Thomas.

--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for
the intended recipient only. Access, disclosure, copying,
distribution, or reliance on any of it by anyone else is prohibited
and may be a criminal offence. Please delete if obtained in error
and email confirmation to the sender.
--
This is the Rational Developer for IBM i / Websphere Development
Studio Client for System i & iSeries (WDSCI-L) mailing list To post
a message email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or
change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/wdsci-l

--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the
intended recipient only. Access, disclosure, copying, distribution, or
reliance on any of it by anyone else is prohibited and may be a
criminal offence. Please delete if obtained in error and email
confirmation to the sender.
--
This is the Rational Developer for IBM i / Websphere Development
Studio Client for System i & iSeries (WDSCI-L) mailing list To post a
message email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or
change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/wdsci-l.

Scanned by MailDefender - managed email security from intY -
www.maildefender.net

Important, this email transmission and any files with it are strictly
confidential to the intended recipient and may be legally privileged.
Any views or opinions presented are solely those of the author and do
not necessarily represent those of BHSF. If you are not the intended
recipient, you must not copy, disclose or distribute its contents in
any way. If you have received this e-mail in error, please notify the
sender and delete the e-mail from your

system.

We have taken steps to ensure this email and attachments are free from
any virus but do not accept any responsibility once this e-mail has
been transmitted. You should scan any attachments for viruses.
No contract may be concluded on behalf of BHSF Limited by e-mail.

Registered Office: BHSF Limited, Gamgee House, 2 Darnley Road,
Birmingham, B16 8TE. www.bhsf.co.uk Registered in England number
35500. BHSF Limited is authorised by the Prudential Regulation
Authority and regulated by the Financial Conduct Authority and
Prudential Regulation Authority.
--
This is the Rational Developer for IBM i / Websphere Development
Studio Client for System i & iSeries (WDSCI-L) mailing list To post a
message email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or
change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/wdsci-l.

--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for
the intended recipient only. Access, disclosure, copying,
distribution, or reliance on any of it by anyone else is prohibited
and may be a criminal offence. Please delete if obtained in error
and email confirmation to the sender.
--
This is the Rational Developer for IBM i / Websphere Development
Studio Client for System i & iSeries (WDSCI-L) mailing list To post
a message email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or
change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/wdsci-l.

Scanned by MailDefender - managed email security from intY -
www.maildefender.net

Important, this email transmission and any files with it are
strictly confidential to the intended recipient and may be legally
privileged. Any views or opinions presented are solely those of the
author and do not necessarily represent those of BHSF. If you are
not the intended recipient, you must not copy, disclose or
distribute its contents in any way. If you have received this e-mail
in error, please notify the sender and delete the e-mail from your

system.

We have taken steps to ensure this email and attachments are free
from any virus but do not accept any responsibility once this e-mail
has been transmitted. You should scan any attachments for viruses.
No contract may be concluded on behalf of BHSF Limited by e-mail.

Registered Office: BHSF Limited, Gamgee House, 2 Darnley Road,
Birmingham, B16 8TE. www.bhsf.co.uk Registered in England number
35500. BHSF Limited is authorised by the Prudential Regulation
Authority and regulated by the Financial Conduct Authority and
Prudential Regulation Authority.
--
This is the Rational Developer for IBM i / Websphere Development
Studio Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.

--
IMPORTANT NOTICE:
This email is confidential, may be legally privileged, and is for the
intended recipient only. Access, disclosure, copying, distribution, or
reliance on any of it by anyone else is prohibited and may be a criminal
offence. Please delete if obtained in error and email confirmation to the sender.