× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. WDSCI-L
  3. October 2012

RPD and CTL+Shift+A

It seems that this CTL+SHIFT+A question comes up quite a bit. Is there a reason that RDp is delivered with this conflict/issue built in?
----------------------------------------------------------------------

message: 1
date: Thu, 4 Oct 2012 13:47:37 +0000
from: Ken Killian <kkillian@xxxxxxxxxxxx>
subject: Re: [WDSCI-L] RPD and CTL+Shift+A

Peter,

I happen to remap mine to CTRL+SHIFT+Q, because I had problems with the Cntrl+shift+A....

I had to remove the "Quick Difference" function, which I don't use, so NO BIGGIE for me...

Anyway, that worked for me, so I got use to that keystroke....

Here is one article that explains it pretty well:
http://www.mcpressonline.com/programming/dev-tools/practical-rdpi-fixing-the-open-member-dialog-feature.html

WDSC--> RDI --> RDP 8.5
:)

I also remap other keys:
F5=Resume/Play
F10=Step-Over
F11=Step-INTO
Shift+F11=Step-Out

F3=Find Next, like other text editors, Notepad++, Foxit PDF Reader, etc...
Shift+F3=Find Previous

Cntrl+] to find matching Bracket, logic, "(", IF/Select/DO/DOU/DOW, etc...
Cntrl+Shift+M=Add monitor Statement (left as default, but remove the CSM for matching brackets)

Great thing about an I.D.E. customize it for your OWN PREFERENCES!
<Cool> :)


-Ken Killian-
(423) 510-3129


-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx [mailto:wdsci-l-bounces@xxxxxxxxxxxx] On Behalf Of Peter Thomas
Sent: Thursday, October 04, 2012 12:31 AM
To: WDSCI-L@xxxxxxxxxxxx
Subject: [WDSCI-L] RPD and CTL+Shift+A


_______________________________________________________________________________________

Note: This e-mail is subject to the disclaimer contained at the bottom of this message.
_______________________________________________________________________________________


I have just installed RDP 8.5 after using WDSC 7 for quite awhile. I'm use to using CTL+Shift+A to edit or browse a source member using the lpex editor.
However in RPD 8.5 there is a conflict and I get another small box at the bottom of the screen where I have to select between Open a Plug in Artifact or Open a member in remote systems Lpex editor.
It says to use ctl+shift+L to select preferences but it isn't immediately obvious to me what to do in the preferences.


---------------------------------------------
Peter Thomas
INSURE/90 Consultant, BTS
CGU Insurance

T (03) 9601 8885 (xtn 38885)
M 0412 812 615
E peter.thomas@xxxxxxxxxx<mailto:name.surname@xxxxxxxxxx>

www.cgu.com.au<http://www.cgu.com.au> We put the You in CGU.

Please consider the environment
before printing this email.
---------------------------------------------





_______________________________________________________________________________________

The information transmitted in this message and its attachments (if any) is intended only for the person or entity to which it is addressed.
The message may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information, by persons or entities other than the intended recipient is prohibited.

If you have received this in error, please contact the sender and delete this e-mail and associated material from any computer.

The intended recipient of this e-mail may only use, reproduce, disclose or distribute the information contained in this e-mail and any attached files, with the permission of the sender.

This message has been scanned for viruses.
_______________________________________________________________________________________
--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.


------------------------------

message: 2
date: Thu, 4 Oct 2012 14:00:38 +0000
from: "Anderson, Kurt" <KAnderson@xxxxxxxxxxxx>
subject: Re: [WDSCI-L] RPD and CTL+Shift+A

When I've done the Unbind thing for co-workers (and myself), somehow I unbound ctrl-shift-a from all actions, which meant I had to rebind it. Your message didn't imply the re-binding to the Member Open. Was I doing something different/wrong?

-Kurt

-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx [mailto:wdsci-l-bounces@xxxxxxxxxxxx] On Behalf Of Edmund Reinhardt
Sent: Thursday, October 04, 2012 12:48 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries
Cc: wdsci-l-bounces@xxxxxxxxxxxx
Subject: Re: [WDSCI-L] RPD and CTL+Shift+A


I bet you weren't expecting to get an answer this late at night :-)

After hitting Ctrl-Shift-L twice (the first time shows other shortcuts
available) you will be taken to the preferences page for General->Keys (of course you can get there by using the Window menu as well) Above the table there is an entry field that says in grey "type filter text". So you want to find the conflicting setting and disable it. So type "Artifact". The second entry "Open Plug-in Artifact" is the offending one, so click on it. Click on the "Unbind Command" button. You can now hit OK and be back in business as usual.

Have a good day, down under.

Regards,



Edmund (E.H.) Reinhardt
COBOL IDE on AIX, DDS, WebFacing, System i Application Development, Rational Developer for Power



2D barcode - Phone: 1-905-413-3125 | Phone: 1-905-854-6195 IBM
encoded with E-mail: edmund.reinhardt@xxxxxxxxxx
contact AIX COBOL: 8200 Warden Ave
information www.youtube.com/user/IBMRational#g/c/62DF24D5BCD43501 Markham, ON L6G 1C7
"In every thing give thanks: for this is the will of Canada
God in Christ Jesus concerning you." - 1
Thessalonians 5:18






From: Peter Thomas <Peter.Thomas@xxxxxxxxxx>
To: "WDSCI-L@xxxxxxxxxxxx" <WDSCI-L@xxxxxxxxxxxx>,
Date: 10/04/2012 12:31 AM
Subject: [WDSCI-L] RPD and CTL+Shift+A
Sent by: wdsci-l-bounces@xxxxxxxxxxxx




_______________________________________________________________________________________


Note: This e-mail is subject to the disclaimer contained at the bottom of this message.
_______________________________________________________________________________________



I have just installed RDP 8.5 after using WDSC 7 for quite awhile. I'm use to using CTL+Shift+A to edit or browse a source member using the lpex editor.
However in RPD 8.5 there is a conflict and I get another small box at the bottom of the screen where I have to select between Open a Plug in Artifact or Open a member in remote systems Lpex editor.
It says to use ctl+shift+L to select preferences but it isn't immediately obvious to me what to do in the preferences.


---------------------------------------------
Peter Thomas
INSURE/90 Consultant, BTS
CGU Insurance

T (03) 9601 8885 (xtn 38885)
M 0412 812 615
E peter.thomas@xxxxxxxxxx<mailto:name.surname@xxxxxxxxxx>

www.cgu.com.au<http://www.cgu.com.au> We put the You in CGU.

Please consider the environment
before printing this email.
---------------------------------------------





_______________________________________________________________________________________


The information transmitted in this message and its attachments (if any) is intended only for the person or entity to which it is addressed.
The message may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information, by persons or entities other than the intended recipient is prohibited.

If you have received this in error, please contact the sender and delete this e-mail and associated material from any computer.

The intended recipient of this e-mail may only use, reproduce, disclose or distribute the information contained in this e-mail and any attached files, with the permission of the sender.

This message has been scanned for viruses.
_______________________________________________________________________________________

--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l.



------------------------------

message: 3
date: Thu, 4 Oct 2012 11:46:29 -0400
from: Michael Ryan <michaelrtr@xxxxxxxxx>
subject: [WDSCI-L] Embedded SQL Formatting with WDSC

I'm using WDSC 7.0, and was wondering if there are any options for
formatting embedded SQL statements? It would be nice to have them look
pretty without a lot of typing, especially when I copy/paste from a
STRSQL session.

Thanks!


------------------------------

message: 4
date: Thu, 4 Oct 2012 11:06:38 -0500
from: Victor Hunt <xlcfdp@xxxxxxxxx>
subject: [WDSCI-L] RDP 8.5.0

I am a recent convert to RDP (well, trying to be). There are a number of
things that puzzle me. Today, when I start RSE I keep receiving java
errors. After I respond with OK (the only option available) the message
goes away and nothing appears to have changed.

I thought I would check for any updates to the product. I went under HELP
and then CHECK FOR UPDATES. Things churn for a bit and then a screen comes
up and tells me that I don't have any software sites selected and would I
like to select some. I respond that I would and up comes a lengthy list of
website addresses. Do I select them all? Or a specific one? Or some other
combination?

I thought I would look at the help screen to see if it would help me.
Selecting HELP gives me a screen with a search box in the upper left
corner. I entered some search text and pressed GO and the screen came back
telling me it was INDEXING and that this would happen only once. A green
bar in the lower right corner of the screen went back and forth a few times
and then the same blank screen I started with was presented with DONE on
the status line. Entering any other test resulted in DONE being displayed
almost immediately with no results.

So I ended the help screen and went back into it. Typed in my search text
and again the INDEXING bit came up and it's been sitting that way for about
30 minutes or so, the green bar in the lower right corner about half way
across its display box and not moving.

Can anyone give a newby a hand here?

(Running under Windows 7 64-bit. RDP was loaded about 2 weeks ago, no
updates)

Thanks,

Vic


------------------------------

message: 5
date: Thu, 04 Oct 2012 12:54:32 -0400
from: Buck Calabro <kc2hiz@xxxxxxxxx>
subject: Re: [WDSCI-L] Embedded SQL Formatting with WDSC

On 10/4/2012 11:46 AM, Michael Ryan wrote:
I'm using WDSC 7.0, and was wondering if there are any options for
formatting embedded SQL statements? It would be nice to have them look
pretty without a lot of typing, especially when I copy/paste from a
STRSQL session.

I turned mine off; the options were a tad too limited to fit the idea of
what I like to see. Windows>Preferences. Type SQL in the filter box at
the top of the navigation tree on the left side.

Remote Systems, Remote Systems LPEX Editor, iSeries parsers, ILE RPG,
Free-Form SQL Formatting

--buck



------------------------------

message: 6
date: Thu, 4 Oct 2012 12:47:53 -0400
from: Edmund Reinhardt <edmund.reinhardt@xxxxxxxxxx>
subject: Re: [WDSCI-L] RPD and CTL+Shift+A


Kurt,
When I tried again, I experienced what you did, that the unbind applies to
all associated commands, so you have to reassociate the Member Open with
Ctrl-Shift-A.
Thanks for catching that. I guess there are disadvantages to responding
that late at night :-)



Regards,



Edmund (E.H.) Reinhardt
COBOL IDE on AIX, DDS, WebFacing, System i Application Development,
Rational Developer for Power



2D barcode - Phone: 1-905-413-3125 | Phone: 1-905-854-6195 IBM
encoded with E-mail: edmund.reinhardt@xxxxxxxxxx
contact AIX COBOL: 8200 Warden Ave
information www.youtube.com/user/IBMRational#g/c/62DF24D5BCD43501 Markham, ON L6G 1C7
"In every thing give thanks: for this is the will of Canada
God in Christ Jesus concerning you." - 1
Thessalonians 5:18






From: "Anderson, Kurt" <KAnderson@xxxxxxxxxxxx>
To: Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries <wdsci-l@xxxxxxxxxxxx>,
Date: 10/04/2012 10:02 AM
Subject: Re: [WDSCI-L] RPD and CTL+Shift+A
Sent by: wdsci-l-bounces@xxxxxxxxxxxx



When I've done the Unbind thing for co-workers (and myself), somehow I
unbound ctrl-shift-a from all actions, which meant I had to rebind it.
Your message didn't imply the re-binding to the Member Open. Was I doing
something different/wrong?

-Kurt

-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx [mailto:wdsci-l-bounces@xxxxxxxxxxxx] On
Behalf Of Edmund Reinhardt
Sent: Thursday, October 04, 2012 12:48 AM
To: Rational Developer for IBM i / Websphere Development Studio Client for
System i & iSeries
Cc: wdsci-l-bounces@xxxxxxxxxxxx
Subject: Re: [WDSCI-L] RPD and CTL+Shift+A


I bet you weren't expecting to get an answer this late at night :-)

After hitting Ctrl-Shift-L twice (the first time shows other shortcuts
available) you will be taken to the preferences page for General->Keys (of
course you can get there by using the Window menu as well) Above the table
there is an entry field that says in grey "type filter text". So you want
to find the conflicting setting and disable it. So type "Artifact". The
second entry "Open Plug-in Artifact" is the offending one, so click on it.
Click on the "Unbind Command" button. You can now hit OK and be back in
business as usual.

Have a good day, down under.

Regards,



Edmund (E.H.) Reinhardt
COBOL IDE on AIX, DDS, WebFacing, System i Application Development,
Rational Developer for Power



2D barcode - Phone: 1-905-413-3125 | Phone: 1-905-854-6195
IBM
encoded with E-mail: edmund.reinhardt@xxxxxxxxxx

contact AIX COBOL:
8200 Warden Ave
information www.youtube.com/user/IBMRational#g/c/62DF24D5BCD43501
Markham, ON L6G 1C7
"In every thing give thanks: for this is the will of
Canada
God in Christ Jesus concerning you." - 1

Thessalonians 5:18







From: Peter Thomas <Peter.Thomas@xxxxxxxxxx>
To: "WDSCI-L@xxxxxxxxxxxx" <WDSCI-L@xxxxxxxxxxxx>,
Date: 10/04/2012 12:31 AM
Subject: [WDSCI-L] RPD and CTL+Shift+A
Sent by: wdsci-l-bounces@xxxxxxxxxxxx




_______________________________________________________________________________________



Note: This e-mail is subject to the disclaimer contained at the bottom of
this message.
_______________________________________________________________________________________




I have just installed RDP 8.5 after using WDSC 7 for quite awhile. I'm use
to using CTL+Shift+A to edit or browse a source member using the lpex
editor.
However in RPD 8.5 there is a conflict and I get another small box at the
bottom of the screen where I have to select between Open a Plug in Artifact
or Open a member in remote systems Lpex editor.
It says to use ctl+shift+L to select preferences but it isn't immediately
obvious to me what to do in the preferences.


---------------------------------------------
Peter Thomas
INSURE/90 Consultant, BTS
CGU Insurance

T (03) 9601 8885 (xtn 38885)
M 0412 812 615
E peter.thomas@xxxxxxxxxx<mailto:name.surname@xxxxxxxxxx>

www.cgu.com.au<http://www.cgu.com.au> We put the You in CGU.

Please consider the environment
before printing this email.
---------------------------------------------





_______________________________________________________________________________________



The information transmitted in this message and its attachments (if any) is
intended only for the person or entity to which it is addressed.
The message may contain confidential and/or privileged material. Any
review, retransmission, dissemination or other use of, or taking of any
action in reliance upon this information, by persons or entities other than
the intended recipient is prohibited.

If you have received this in error, please contact the sender and delete
this e-mail and associated material from any computer.

The intended recipient of this e-mail may only use, reproduce, disclose or
distribute the information contained in this e-mail and any attached files,
with the permission of the sender.

This message has been scanned for viruses.
_______________________________________________________________________________________


--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list
options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/wdsci-l.

--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.


------------------------------

--
This is the Rational Developer for IBM i / Websphere Development Studio Client for System i & iSeries (WDSCI-L) digest list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.


End of WDSCI-L Digest, Vol 10, Issue 305
****************************************

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.