Re: Webfacing Server connection Socket closed

WAS on the same machine as the WF server should NOT be trying to grab port
4004 or it will not work. That is, either WAS or the WF server will fail
to bind to the port. 4004 is the port used by the WF server, not WAS, at
least for the default config.

Port 4004 should be serviced by the WebFacing server itself. Look in your
WF project and check that the CL invocation settings for the WF'd app you
are trying to run is pointing to the right address for your i5 and that it
is configured to use port 4004. Since your WF server seems to be running
and responding to port 4004 I would expect the problem to be that the
project is not pointing to the same place.

Mike


Mike Hockings, P.Eng.
System i Application Development Tools - CODE/Designer & WebFacing !
IBM Canada Ltd. Laboratory
hockings@xxxxxxxxxx
voice 905 413 3199




"Cheri Duchrow" <cduchrow@xxxxxxxxxxxxxx>
Sent by: wdsci-l-bounces@xxxxxxxxxxxx
06/07/2007 01:21 PM
Please respond to
Websphere Development Studio Client for iSeries <wdsci-l@xxxxxxxxxxxx>


To
wdsci-l@xxxxxxxxxxxx
cc

Subject
Re: [WDSCI-L] Webfacing Server connection Socket closed






If you are running this using the test server within WDSC check to make
sure
that test WAS server has 4004 as a port listed in it's configuration.
It used to be in previous versions of the test WAS server configurations
that I would have to add 4004 port to the test server.
Startup your test server and then right click on it and go to the admin
console. If you are familiar with the WAS admin console you should be
able
to navigate and find the port setup. Just in case:
Go to the servers and select the Application servers. You may have to
scroll down but on the screen will be a Ports link. Click on it and you
will see a list. Add one that has * as the host and port 4004 as the
port.

In a WAS 5.x test server it was a little easier to add ports to the
server.


Also verify that the iSeries has the two system values setup correctly:
Qautocfg has to be set to yes
Qautovrt has to be set to *nomax

In all of my traveling to various environments helping people setup
WebFacing these two system values had to be set this way for WebFacing to
work.

HTH
Cheri

<rstearns@xxxxxxxxxxxxx> wrote in message
news:OF6E18CA10.4DE14D34-ON882572F3.0053E9B8-882572F3.00572602@xxxxxxxxxxxxxxx
.

Problem
We have built a webfaced application, installed it on WAS and started

the

app. After launching the application and entering a logon and password,
the app server attempts to connect to the WF server -http://local
IP:10016/AM/WFInvocation.do and then the error occurs.
We assumed it was the Webfacing server, checking PTF's, making sure the
port was open, etc. and can not identify the problem.

NETSTAT indicates the WF server is never touched when the application
tries to connect

However, if we URL to http://99.99.99.99:4004 or http://local

IP:4004

NETSTAT indicates that the WF server is listening and shows a hit on the
server

Question:
How do I troubleshoot the connection between the Websphere app server

and

the Webfacing server?

Information:
V5R4
WAS V6.1
WF Server BUILD VERSION 200601261300 and PTF's applied
WF server is running
QQFVTSVR QUSER BCI .0 PGM-QQFVTSVR DEQW
QQFWFSVR QUSER BCI .0 PGM-QQFWFSVR TIMW
*netstat:
Connection type . . . . . . : *TCP
Local address . . . . . . . : *
Local port . . . . . . . . . : 4004
Remote address . . . . . . . : *
Remote port . . . . . . . . : *
Opt Name User Number
QQFWFSVR QUSER 313997

ERROR
WF0103: An error occurred while establishing connection with the

WebFacing

server on the host.
WFC056: While connecting to host 99.99.99.99 on port 4004 the
following exception was thrown: 'java.net.SocketException: Socket

closed'.

Possible causes: The WebFacing server may be down, or the TCP port 4004,
specified by the web application, is not configured and assigned to
WebFacing TCP services on host 99.99.99.99.
Details :

com.ibm.etools.iseries.webfacing.runtime.host.core.WFConnectionException:

WFC056: While connecting to host 99.99.99.99 on port 4004 the following
exception was thrown: 'java.net.SocketException: Socket closed'.
Possible causes: The WebFacing server may be down, or the TCP port 4004,
specified by the web application, is not configured and assigned to
WebFacing TCP services on host 99.99.99.99.


--
This is the Websphere Development Studio Client for iSeries (WDSCI-L)
mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.