RE: Lost My CODE/400

Mike,

Why not try the LPEX editor in the RSE perspective now?  Basically, Code400
is going away as all it's features have been absorbed into LPEX.  And get
ready: Eventually the same thing will happen to Code Designer.


Rick Weber | Toys Я Us International 


-----Original Message-----
From: Mike Pantzopoulos - (H/O) [mailto:mpantzopoulos@xxxxxxxxxxxxxxxx] 
Sent: Friday, November 11, 2005 12:17 AM
To: wdsci-l@xxxxxxxxxxxx
Subject: [WDSCI-L] Lost My CODE/400


I was recently given a new machine with 2 gig of memory so that I could get
WDSC 6.0 installed. As part of preparation I tried starting CODE400 through
a normal Client Access session on the new machine. Didn't work! I broke out
into a cold sweat. To cut a long and sad story short, the PC gurus loaded a
ghost image of my previous machine onto the new machine. At the same time we
also connected my old machine to the netwrok, and after logging on was able
to start Code400 (STRCODE) using the *PRV parameter options. However I
haven't been able to STRCODE via a Clent Access session on my new PC.

Naturally, the IP addresses are different, but even when I set the IP
address of the new machine into RMTLOCNAME parameter ( or to *RESOLVE)
STRCODE still hangs. 

I saw in another post that Victoria Batthish from the Toronto Lab was able
to solve a similar question by being given the Job Log.

The Communications Daemon was running on my PC.

I waited about 60 seconds and terminted the STRCODE, and have cut and pasted
the job log.

Here is my Job Log from the on-line session where I am trying to STRCODE on
the new machine. If she is lurking on this site please help! Going back to
PDM is like using punched cards!



STRCODE SERVER(ANSVAR) RMTLOCNAME(*RESOLVE) PARMS(*TA) PORT(4200)      
0001.G> AdeStartServer...........: Server name is 'ANSVAR'.            
0002.G> AdeStartServer...........: Remote location is '*RESOLVE'.      
0003.G> AdeStartServer...........: Comm type is '*PRV'.                
0004.G> AdeStartServer...........: Port is '4200'.                     
0005.G> AdeStartServer...........: Userid is '*NONE'.                  
0006.G> AdeStartServer...........: Password is ''.                     
0007.G> AdeStartServer...........: Parms are '*TA'.                    
0008.F> ipOpenUserSpace..........: Starting.                           
0009.L>   ipOpenUserSpace........: Space Name is *LIBL/STRCODE.        
0010.G> GetStartupDefaults.......: STRCODE defaults retrieved.

0011.D> GetStartupDefaults: Data-encoded

0012.D>   0 |74DD1200 01000000-48001A01 40001A01| ............ ...

0013.D>  10 |325DBE51 B8420000-24DD1200 088A068E| .)..............

0014.D>  20 |2B48E6FD 5C48E6CF-62CF6420 A4A4A4A4| ..W.*.W.....uuuu

0015.D>  30 |5B5B91DD 97DDBA1F-E0E0E0E0 DFD2051E| $$j.p.[.\\\\.K..

0016.D>  40 |571F051E ________-________ ________| ....____________

0017.F> ipEVF4100................: Starting.

Default information for STRCODE retrieved successfully.

0018.F> ipGetJobInfo.............: Starting.

0019.L>   ipGetJobInfo...........: Userid is PANTZOM, Job Name/Number is

  QPADEV000A/655665, Current library is *NONE.
 0020.F> ipGetSysInfo.............: Starting.

0021.L>   ipGetSysInfo...........: System name is ANSVAR, VRM V5R3M0,

  Serial number 655F5BC, Model type 520.

0022.F> ipInit...................: Starting.

0023.L>   ipInit.................: Done.

0024.F> ipCvtPortStr.............: Starting.

0025.F> ipClientConnect..........: Starting.

0026.L>   ipClientConnect........: Host is 192.168.1.127  , server port

  is 4200.

0027.L>   ipClientConnect........: Socket id is 13.

0028.F> ipIPAddress..............: Starting.

0029.L>   ipClientConnect........: Host address is 192.168.1.127.

  2 >  *SYSTEM/ENDRQS                          




 

Mike Pantzopoulos

EIG-Ansvar Limited
Tel  : 61 (3) 9614 3535
Fax: 61 (3) 9614 2740


****************************************************************************
*****************************
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you are not the intended recipient, any use, disclosure or copying of
this message is unauthorised. If you have received this message in error,
please reply using the sender's email address. 

This footnote confirms that this email message has been scanned for computer
viruses. EIG-Ansvar Limited does not accept liability for any loss or
damage, whether caused by our own negligence or not, that results from a
computer virus or defect in the transmission of this email or any attached
file. 

EIG-Ansvar Limited - Australia (A.B.N. 21 007 216 506)
Email : insure@xxxxxxxxxxxxxxxx

Eig-Ansvar Limited - New Zealand
Email : insure@xxxxxxxxxxxxxxxx

****************************************************************************
*****************************