Re: [WDSCI-L] Changing Button "key" width

[Mike Tuckman <Mike.Tuckman@xxxxxxxxxxxxxxxx>]

It is within the same JSP page.  If you look, you will see there is code
that checks if the command keys being built are within the application
screen or within the left command key section.  Either way you can modify
this code to display the keys anyway you want.
                                                          
                                                          
                                                          
 Mike Tuckman                                             
 Senior Systems Engineer                                  
 TNT Logistics North                                      
 America                                                  
                                                          




wdsci-l-bounces@xxxxxxxxxxxx wrote on 10/28/2004 08:44:10 AM:

> Michael,
> Thanks for the info but I am looking to modify the command key generated
> outside of the left side of the screen.  We have command keys that are
part
> of the main screen.
>
> Mark
>
> ----- Original Message -----
> From: "Gibbons, Michael" <bmis04@xxxxxxxxxxxxxxx>
> To: "'Websphere Development Studio Client for iSeries'"
> <wdsci-l@xxxxxxxxxxxx>
> Sent: Monday, October 18, 2004 3:14 PM
> Subject: RE: [WDSCI-L] Changing Button "key" width
>
>
> > Mark,
> >
> > I am told you can modify these settings by adding parameters to the
> > jsp:include for cmdKeys.jsp inside of pagebuilder.jsp. See the redbook
> > (SG24-6331-00 Mastering the IBM Webfacing Tool). On page 154. Let us
know
> if
> > you got this to work. I am trying to use this example to make the
command
> > keys appear horizontal.
> >
> > Good Luck!
> >
> >
> > Michael P. Gibbons
> > Manager of Programming & Technical Services
> > MARYWOOD UNIVERSITY
> > 2300 Adams Ave.
> > Scranton, PA 18509
> >
> >
> >
> > -----Original Message-----
> > From: Mark Giordano [mailto:mgiordano@xxxxxxxxxxxxxxxxxxx]
> > Sent: Monday, October 18, 2004 1:53 PM
> > To: wdsci-l@xxxxxxxxxxxx
> > Subject: [WDSCI-L] Changing Button "key" width
> >
> >
> > When I convert and publish an application using webfacing the buttons
that
> > replace command keys with text are displayed without a problem on the
left
> > side of the screen.  For example in an application we use the F8=Send
> > Message.  On the left side it displays the words Send Message within
the
> > defined box with no wrap around.  However we have F8 defined within the
> > screen itself also and when it is displayed there it wraps onto the
next
> > line.  So Send appears within the box but Message appears underneath it
> not
> > enclosed by the box.  I read that there were default width and height
of
> 100
> > and 30 respectively but even with those settings there should be plenty
of
> > room.  Is there something that has to be changed to increase the size
or
> can
> > you point me to the place where I can increase what is the default
> settings
> > if necessary.  Any suggestions?
> >
> > Mark Giordano