As it stands we are looking at going with the Albany Software for
certain parts of our bacs transmissions at the same time going for
GEAC's proposed solution for the SYSTEM21 bits. 



Kind Regards
Glen Boyle      
Group IT Manager        
G.Costa & Co. Limited   
Tel: 01622 713318       
Fax: 01622 713331       
www.gcosta.co.uk        
gboyle@xxxxxxxxxxxx     
This communication contains information which is confidential and may
also be privileged. It is for the exclusive use of the intended
recipient(s). If you are not the intended recipient(s) please note that
any form of distribution, copying or use of this communication or the
information in it is strictly prohibited and may be unlawful. If you
have received this communication in error please return it to the
sender.         
 
 

-----Original Message-----
From: system21-bounces@xxxxxxxxxxxx
[mailto:system21-bounces@xxxxxxxxxxxx] On Behalf Of Paul Milne-Smith
Sent: 25 February 2005 17:12
To: System 21 Users; jbausers-l@xxxxxxxxxxxx
Subject: RE: [SYSTEM21] BACS and BACS-IP

Everyone
        I have checked this out and there are only 13 companies that
have been approved by BACS in the UK - Eiger is one of them. This list
was at April
2004 mind you.

        ABM Limited
        Access Europe
        Albany Software
        APT
        Barron McCann
        Bottomline Technologies
        Eiger Systems
        Fortis Bank
        Grange Management Cons
        InterSoftware UK
        Microgen
        NatWest Bank
        Payactive

        I would shop around before going with Eiger

        ps - Don't underestimate the amount of work required to
implement BACSTEL-IP

        best regards

        Paul Milne-Smith

-----Original Message-----
From: system21-bounces@xxxxxxxxxxxx
[mailto:system21-bounces@xxxxxxxxxxxx]On Behalf Of Fred Mitchell
Sent: 25 February 2005 14:01
To: 'System 21 Users'; jbausers-l@xxxxxxxxxxxx
Subject: RE: [SYSTEM21] BACS and BACS-IP



I am not currently a user of BACS software at the moment but I have
installed and used a number of packages over the years.  The one I
usually recommend is from Grange Management Consultants, take a look
here:
http://www.grange-systems.co.uk/

Thanks,

--
Fred Mitchell
Concise Consulting Ltd
Newcastle upon Tyne, England

Mob: +44 (0)7711 168395
Tel: +44 (0)191 2701698
Fax: +44 (0)8700 517273

mailto:fred@xxxxxxxxxx
http://www.ccl400.com

-----Original Message-----
From: system21-bounces@xxxxxxxxxxxx
[mailto:system21-bounces@xxxxxxxxxxxx]
On Behalf Of John.Mcpherson@xxxxxxxxxxxxxxxx
Sent: 25 February 2005 13:54
To: jbausers-l@xxxxxxxxxxxx
Subject: [SYSTEM21] BACS and BACS-IP


A quick question for the folks in the UK.  As all of you BACS users are
aware, the old BACS facility is being switched off at the end of this
year.
Now, GEAC have an offering in conjunction with a company called Eiger
Systems to work with the BACS-IP facility.  I was wondering what others
are planning on doing.  Are you going to go with the GEAC solution or
are you planning on going with a different one (and if it is a different
one, then which one)?

Thanks, in advance, for your help.

Regards,
John McPherson
European Business Analyst
New Balance Athletic Shoes

_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list To post a message
email: SYSTEM21@xxxxxxxxxxxx To subscribe, unsubscribe, or change list
options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/system21.

_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list To post a message
email: SYSTEM21@xxxxxxxxxxxx To subscribe, unsubscribe, or change list
options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/system21.



_______________________________________________
This is the System 21 Users (SYSTEM21) mailing list To post a message
email: SYSTEM21@xxxxxxxxxxxx To subscribe, unsubscribe, or change list
options,
visit: http://lists.midrange.com/mailman/listinfo/system21
or email: SYSTEM21-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/system21.


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________

The views expressed in this email are the views of the individual and may not 
reflect the views of the organisation. G Costa & Co Limited accepts no 
liability for any losses or damages arising from reliance on the information 
contained in this email.The information contained in this email is 
confidential, may be legally privileged and is intended solely for use by the 
individual or organisation to whom it is addressed.

Email information is subject to copyright and must not be used, disseminated, 
copied or disclosed to third parties without the written consent of G Costa & 
Co Limited.
If you are not the intended recipient you should delete this email, destroy all 
copies and inform the Webmaster (webmaster@xxxxxxxxxxxx).

Copyright G Costa & Co Limited
All Rights Reserved

Registered Office: Weston Centre, 10 Grosvenor Street, London W1K 4QY

This email has been scanned for all viruses by the MessageLabs Email Security 
System. For more information on a proactive email security service working 
around the clock, around the globe.
Visit http://www.messagelabs.com


This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2020 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].