You may also have other records with what will be an unrecognized UoM - eg stock movements on INP95 - which may come back to bite you later, eg when running year-end reports, long after you've forgotten what you've done. If you can be certain you've addressed ALL occurrences, go ahead. Peter Joel Saltway Ltd +44 7884 306501 -----Original Message----- From: system21-bounces@xxxxxxxxxxxx [mailto:system21-bounces@xxxxxxxxxxxx] On Behalf Of Johnson, Duane Sent: 19 February 2004 17:15 To: 'System 21 Users' Subject: RE: [SYSTEM21] different UOM in different stockrooms for same i t em I received an e-mail concerning changing the UOM, which I thought would be good to pass along. This applies when actually changing the UOM on a part, and not just fixing an error on a record or two. So, with his permission, here is what Otto Ritter has to say. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Duane, I saw your comment on Midrange concerning changing UOM. Please take into consideration that if you are going to make such a change that you should zero out the inventory balance in the stockroom you are making the UOM change to. then the inventory can be reentered at the proper UOM quantity. Also be aware that all of the history of usage in INP90 is at the previous UOM and that all Product structures using the item/stockroom record should be evaluated for issue quantities. Otto Ritter Geac System21 _______________________________________________ This is the System 21 Users (SYSTEM21) mailing list To post a message email: SYSTEM21@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/system21 or email: SYSTEM21-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/system21.