Re: Data Area Problem

Try changing your code as follows:
D FshDte          S              8  0 DtaAra
      C    *LOCK                IN              FshDte                 
93 

You can not initialize a data area.
The *DTAARA DEFINE statement defines the field FshDte, so you have duplicate definitions in your code.  The first definition is a stand alone field, and the second is a data area.
If you make the changes above, you should not have any more problems.

hth,
 
Jeff Young
Sr. Programmer Analyst
IBM -e(logo) server Certified Systems Exper - iSeries Technical Solutions V5R2 
IBM  Certified Specialist- e(logo) server i5Series Technical Solutions Designer V5R3
IBM  Certified Specialist- e(logo)server i5Series Technical Solutions Implementer V5R3
  
 






________________________________
From: Exterior Wood <TNonamaker@xxxxxxxxxxxxxxxx>
To: RPG programming on the IBM i / System i <rpg400-l@xxxxxxxxxxxx>
Sent: Tue, November 24, 2009 5:01:47 PM
Subject: RE: Data Area Problem

I think the problem is, that they cannot be the same name
... using upper and lower case doesn't make them different
... The d spec defines the field ... it cannot be both a field and a dtaara

Factor 2 in your C spec is supposed to represent a *Like situation
... Just call your field in the D specs something else
... and I think that will work just fine
                                                                 

-----Original Message-----
From: rpg400-l-bounces@xxxxxxxxxxxx [mailto:rpg400-l-bounces@xxxxxxxxxxxx]
On Behalf Of THarteau@xxxxxxxxxxxxxxxxxx
Sent: Tuesday, November 24, 2009 9:40 AM
To: RPG programming on the IBM i / System i
Subject: Data Area Problem

Hi,
        I am storing the last date the program was run in a data area.
This then becomes the beginning date the next time.  I have done this a
number of times and never had a problem. Now I keep getting the error: 
RNF5262E Factor 2 operand has data type that is not allowed for this
operation.  The help text just says factor 2 is not the correct data type.
This is probably just something I am not seeing, can someone else spot the
problem?

This is the data area:
Data area . . . . . . . :  FSHDTE
  Library . . . . . . . :    V64BPCSPGM
Type  . . . . . . . . . :  *DEC
Length  . . . . . . . . :  8 0
Text  . . . . . . . . . :  Last Date Fishmouth Report Run-BOM299
Value . . . . . . . . . :  20091115

And here is the code bits:
    D FshDte          S              8  0 INZ(0)
    C    *DTAARA      DEFINE  FSHDTE        FshDte
    C    *LOCK                IN              FshDte                 
93
The error is on the DEFINE line.  The indicator is in the low position.
There is an OUT command later that puts todays date in the dataarea. I am
on V5R4.

<===================================================>

Terri Harteau
Felker Brothers Corporation
****************
"Do not follow where the path may lead. Go instead where there is no path
and leave a trail."
Ralph Waldo Emerson

****************