We use the Bos Controller to communicate with this warehouse about 20 miles
away. This etwinax *VRT 3812 is NOT IPDS. Therefore, unless the dot matrix
has an emulation that supports DDS barcodes, I'm not sure how this will
work. Perhaps Printronix has a different WSCST that can be used to
initialize support for DDS Barcodes.
Does the Printronix printer supports barcode printing. And if so, how is
that accomplished?
--- On Mon, 5/12/08, Bill Burnet <BBurnet@xxxxxxxxxxxxxxxxxxxx> wrote:
From: Bill Burnet <BBurnet@xxxxxxxxxxxxxxxxxxxx>
Subject: RE: Barcode that is alpha
To: "RPG programming on the AS400 / iSeries" <rpg400-l@xxxxxxxxxxxx>
Date: Monday, May 12, 2008, 4:57 PM
I've done it with a Printronix that had a Magnum graphics card in it. It
didn't have IPDS or AFPDS support so I had to use the Printronix
graphics language to turn on graphics mode and send the control
characters to print bar codes. Not fun and the quality of the bar code
was poor.
-----Original Message-----
From: Adam West [mailto:adamster@xxxxxxxxx]
Sent: Monday, May 12, 2008 11:27 AM
To: RPG programming on the AS400 / iSeries
Subject: Re: Barcode that is alpha
One issue is the Printronix = as a dot matrix ABSOLUTE MOVEMENT
printer, I am
being told by IBM SOftware support.
Perhaps someone here has used the Printronix successfully?
--- On Mon, 5/12/08, Buck <kc2hiz@xxxxxxxxx> wrote:
From: Buck <kc2hiz@xxxxxxxxx>
Subject: Re: Barcode that is alpha
To: rpg400-l@xxxxxxxxxxxx
Date: Monday, May 12, 2008, 4:08 PM
Adam West wrote:
> I was just curious when I look at the output it doesn't look like
a
bar code at all.
> Before I tell the operators to be on the lookout for this, is this
correct? that is it
> will print a barcode on the printer but if you look at the spool
on
WRKSPLF it shows
> as a non barcode text field?
Guessing that 'looking at' here means WRKSPLF, that's right.
You
probably see a message at the bottom of the display saying 'Bar
codes
not displayed.' Just print it out and see how it looks with your
printer. Here is a simple sample:
A R PRTHED
*
A 1'Bar code test 14'
A SKIPB(3)
A SPACEA(1)
A R PRTDTA
A CODE 14 O 10BARCODE(CODE3OF9 *NOHRI)
A SPACEA(3)
Compile with DEVTYPE(*AFPDS)
fbarcode o e printer oflind(*in01)
c write prthed
c eval code = 'TEST123'
c write prtdta
c eval *inlr = *on
--
This is the RPG programming on the AS400 / iSeries (RPG400-L)
mailing list
To post a message email: RPG400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/rpg400-l.
----------------------------------------------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.
Try it
now.
--
This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing
list
To post a message email: RPG400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/rpg400-l.
--
This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing list
To post a message email: RPG400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/rpg400-l.
midrange.com
