|
Yeah, I would like to be able to do this ... but our family room is on slab, so there's no real way to run the wire. I would also be open to running a wire along the joists ... but I can't figure out how to get my fish all the way to the basement.
Our family room also sits on a slab next to the main house with a basement but has no direct access. About 10 or 12 years ago I wanted to run cat-5, phone, and CATV from the basement to the 2nd floor of the main house but had the same dilemma of how to get from the basement to areas that weren't directly above the basement. The solution was to first go out into the garage from the basement. The joist above the basement sit on the foundation which gave me about a foot of clearance to drill a hole. Once in the garage I used surface-mounted channel to protect the wires while they go over to a corner and up into the "ceiling", which is actually the eves next to the bedroom that is over the garage. From there, they run through the air space above the fiberglass insulation that goes over the bedroom. There is a similar air space going down to the eves above our family room. By chance, at the peak of the air space (above the garage/bedroom roof) there is a small access hole that connects to the attic above the 2nd floor bedrooms. If your house has a similar floor plan and if space above the garage is unfinished it could be a lot easier. Basically for me, this meant a lot of measuring, climbing, crawling through blown-in insulation, more measuring, more climbing and crawling, but ultimately when I drilled holes down from the attic I always drilled into the wall space, not through the ceiling in a room. Still, it was a LOT of work. Also, before I drilled down from the attic into any wall space I first drilled a small pilot hole and had my wife watching to see if I was drilling through the ceiling, just in case my measurements were off. You also need to do a bit of planning and a good drywall saw to cut the holes in the walls. In the end you get nice wall plates that look like they belong in the room. I'm also a firm believer that in addition to pulling the wire you also pull a string to be left in the wall in case you ever want to do it again. That will save a lot of time and aggravation of having to re-fish the additional wire. If you can afford it, it also doesn't hurt running extra wire that you may not need now (like a 2nd data or phone) but might need later. Dave Parnin -- Nishikawa Standard Company Topeka, IN 46571 daparnin@xxxxxxxxxxxxxx
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.