RE: My Network Places and what PC's you can and can't see...

["Bob Crothers" <Bob2@xxxxxxxxxxxxxx>]

Chuck,

Try clicking on "Entire Network",  Then those other workgroups/domains
should show up.

BTW, it can take a few minutes after you reboot for everything to show.

Bob

-----Original Message-----
From: midrange-nontech-admin@midrange.com
[mailto:midrange-nontech-admin@midrange.com]On Behalf Of Chuck Lewis
Sent: Wednesday, September 18, 2002 10:54 AM
To: Midrange-Nontech
Subject: My Network Places and what PC's you can and can't see...

Hi Folks,

Running Windows 2000 Pro and are connecting to the AS/400 via IP and
remote
sites are connected via a Frame Relay WAN. When I click on My Network
Places
I see PC's in this building (our corporate headquarters, and one at a
branch
1 hour away (where there is MORE than one computer) and one at a branch
that
is 2 1/2 hours away (and also has more than 1 computer) and no
computers at
the other 7 branches OR the AS/400...

The only thing I can think of that might be effecting this is the
Workgroup
name under Identification maybe ? But that only addresses the PC's and
not
the AS/400.

Any ideas ?

Thanks !

Chuck

_______________________________________________