RE: Error while performing a restore

[Michael Mayer <michael.mayer@xxxxxxxxxxxxx>]

Almost sounds like part of a tape set was deleted from BRMS.
MM


Respectfully,
Michael Mayer
IBM i on Power System Admin / VMO Specialist ERMCO-ECI
2225 Industrial Rd
Dyersburg, Tennessee 38024
Cell, Office and Text Messages: 518.641.8906
Email: michael.mayer@xxxxxxxxxxxxx
https://www.ermco-eci.com/
https://ermcopower.com/
IBM i Award Winning Blog Site: https://ibmireference.blogspot.com/
Awarded IBM 2024 Advocate, Contributor, Influencer and IBM i Ready Badges.





Today's Topics:

   1. Error while performing a restore (Reggie Monroe via MIDRANGE-L)
   2. Re: Error while performing a restore (Rob Berendt)
   3. RE: Error while performing a restore
      (Reggie Monroe via MIDRANGE-L)


----------------------------------------------------------------------

message: 1
date: Fri, 10 Jan 2025 20:59:51 +0000
from: Reggie Monroe via MIDRANGE-L <midrange-l@xxxxxxxxxxxxxxxxxx>
subject: Error while performing a restore

Our daily backups are done using BRMS. We had to restore some libraries. We were able to successfully restore 4 out of the 5 libraries using the rstlib command. We received the below error message while restore one of the larger libraries. Any suggestions is much appreciated. Thank you.

Message ID . . . . . . : CPA4264 Severity . . . . . . . : 99 Message type . . . . . : Sender copy Date sent . . . . . . : 01/08/25 Time sent . . . . . . : 20:28:32

Message . . . . : Found F00032; expected M00001 on device TAP04. (C I R) Cause . . . . . : The loaded volume F00032 does not match the expected volume M00001 on device TAP04 for file QSYSTAP in library QSYS.
Recovery . . . : Do one of the following:
-- Use C to cancel processing.
-- Use I to ignore the error and process volume F00032.
-- Use R to try the operation again after loading the correct volume M00001.
________________________________
This e-mail message, including any attachments, is for the sole use of the intended recipient, and may contain material that is privileged or confidential and legally protected from disclosure. If you are not the intended recipient or have received this message in error, you are not authorized to copy, distribute, or otherwise use this message or its attachments. Please notify the sender immediately by return e-mail and permanently delete this message and any attachments.


------------------------------

message: 2
date: Fri, 10 Jan 2025 16:11:22 -0500
from: Rob Berendt <robertowenberendt@xxxxxxxxx>
subject: Re: Error while performing a restore

Is there more to this than just suggesting you load in the tape it's asking for?

On Fri, Jan 10, 2025 at 4:00?PM Reggie Monroe via MIDRANGE-L < midrange-l@xxxxxxxxxxxxxxxxxx> wrote:

> Our daily backups are done using BRMS. We had to restore some libraries.
> We were able to successfully restore 4 out of the 5 libraries using
> the rstlib command. We received the below error message while restore
> one of the larger libraries. Any suggestions is much appreciated. Thank you.
>
> Message ID . . . . . . : CPA4264 Severity . . . . . . . : 99 Message
> type . . . . . : Sender copy Date sent . . . . . . : 01/08/25 Time
> sent . . . . . . : 20:28:32
>
> Message . . . . : Found F00032; expected M00001 on device TAP04. (C I
> R) Cause . . . . . : The loaded volume F00032 does not match the
> expected volume M00001 on device TAP04 for file QSYSTAP in library QSYS.
> Recovery . . . : Do one of the following:
> -- Use C to cancel processing.
> -- Use I to ignore the error and process volume F00032.
> -- Use R to try the operation again after loading the correct volume
> M00001.
> ________________________________
> This e-mail message, including any attachments, is for the sole use of
> the intended recipient, and may contain material that is privileged or
> confidential and legally protected from disclosure. If you are not the
> intended recipient or have received this message in error, you are not
> authorized to copy, distribute, or otherwise use this message or its
> attachments. Please notify the sender immediately by return e-mail and
> permanently delete this message and any attachments.
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To
> subscribe, unsubscribe, or change list options,
> visit:
> https://list/
> s.midrange.com%2Fmailman%2Flistinfo%2Fmidrange-l&data=05%7C02%7Cmichae
> l.mayer%40ermco-eci.com%7C4d8a47e838504aa209c508dd31bc28cd%7Cd2deeaf27
> 0e4425c91d7d99d784e89d6%7C0%7C0%7C638721406407032248%7CUnknown%7CTWFpb
> GZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkF
> OIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=WXLB74KFTObUa1HRk5VZF
> MxRr0xle69RyICxhAYqFv4%3D&reserved=0
> or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
> Before posting, please take a moment to review the archives at
> https://archive.midrange.com/midrange-l.
>
> Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription
> related questions.


------------------------------

message: 3
date: Fri, 10 Jan 2025 21:17:01 +0000
from: Reggie Monroe via MIDRANGE-L <midrange-l@xxxxxxxxxxxxxxxxxx>
subject: RE: Error while performing a restore

Sorry I neglected to mention that there is only 1 tape.

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Rob Berendt
Sent: Friday, January 10, 2025 1:11 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: Error while performing a restore

External eMail: Do not open attachments or click on links unless you expected to receive them from a trusted sender.


Is there more to this than just suggesting you load in the tape it's asking for?

On Fri, Jan 10, 2025 at 4:00?PM Reggie Monroe via MIDRANGE-L < midrange-l@xxxxxxxxxxxxxxxxxx> wrote:

> Our daily backups are done using BRMS. We had to restore some libraries.
> We were able to successfully restore 4 out of the 5 libraries using
> the rstlib command. We received the below error message while restore
> one of the larger libraries. Any suggestions is much appreciated. Thank you.
>
> Message ID . . . . . . : CPA4264 Severity . . . . . . . : 99 Message
> type . . . . . : Sender copy Date sent . . . . . . : 01/08/25 Time
> sent . . . . . . : 20:28:32
>
> Message . . . . : Found F00032; expected M00001 on device TAP04. (C I
> R) Cause . . . . . : The loaded volume F00032 does not match the
> expected volume M00001 on device TAP04 for file QSYSTAP in library QSYS.
> Recovery . . . : Do one of the following:
> -- Use C to cancel processing.
> -- Use I to ignore the error and process volume F00032.
> -- Use R to try the operation again after loading the correct volume
> M00001.