×

Good News Everybody!

The new search engine is LIVE!

Please report any problems to david (at) midrange.com.




I’ve run into settings on the printer that do not release the connection from one server or another to enable the IBM i to reconnect when needed. Maybe the print server on the printer needs adjustment?


Jim Oberholtzer
Agile Technology Architects

On Feb 4, 2024, at 6:03 PM, Don Brown via MIDRANGE-L <midrange-l@xxxxxxxxxxxxxxxxxx> wrote:

Thanks Jack,

I would agree with you normally but immediately after she prints form Windows the printer responds to the ping from IBMi.

But one thing I will now get her to do is to try a ping from Windows first.

Thanks for the reply

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Jack Woehr via MIDRANGE-L
Sent: Monday, February 5, 2024 9:22 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Cc: Jack Woehr <jwoehr@xxxxxxxxxxxxxxxxxxxxxxxx>
Subject: Re: Printer issue - Very frustrating

If you can ping it from Windows and can't ping it from IBM I, you don't have a printer issue, you have a network issue.

On Sun, Feb 4, 2024, 15:27 Don Brown via MIDRANGE-L < midrange-l@xxxxxxxxxxxxxxxxxx> wrote:


Hi All,

I have a printer that generally will not print, the configuration is below.

Let me provide two scenarios.

Scenario #1.
Report generated to the printer.
Reports are in *PND status.
If I try and ping the IP address of the printer it fails.
End writer / start writer no change (As expected if I can't ping the
device)
Turn the printer OFF and back ON.
Reports print.

Scenario #2
Report generated to the printer.
Reports are in *PND status.
If I try and ping the IP address of the printer it fails.
End writer / start writer no change (As expected if I can't ping the
device)
Print from Microsoft Word, word doc prints, then reports print.
Ping response is successful.
Note: The printer on the PC where the word doc was printed from is
configured to print directly to the printer not via a server.

I collected a communications trace and it just shows no response from
the printer.
The trace shows the IBMi send a SYN to the printer, followed by 5
retries then a wait for approximately 1:40 (One minute and forty seconds.
This is repeated until I believe she printed the word document and
then the pending print job prints.

The printer and the IBMi are on the same network and subnet and local.

The printer is a 'Ricoh MPC2800 Printer'

Printer Definition
CRTDEVPRT DEVD(PRT03)
DEVCLS(*LAN)
TYPE(3812)
MODEL(1)
LANATTACH(*IP)
PORT(9100)
ATTACH(*DIRECT)
ONLINE(*YES)
FONT(11 *NONE)
FORMFEED(*AUTOCUT)
SEPDRAWER(*FILE)
PRTERRMSG(*INQ)
MSGQ(*CTLD)
ACTTMR(170)
INACTTMR(*SEC15)
LINESPEED(19200)
WORDLEN(8)
PARITY(*NONE)
STOPBITS(1)
TRANSFORM(*YES)
MFRTYPMDL(*HPCOLORLJ)
PPRSRC1(*A4)
PPRSRC2(*A4)
ENVELOPE(*NUMBER10)
ASCII899(*NO)
IMGCFG(*NONE)
CHRID(*SYSVAL)
RMTLOCNAME('172.16.25.201')
SYSDRVPGM(*HPPJLDRV)
TEXT('Ricoh MPC2800 Printer')
PUBLISHINF(*DUPLEX *COLOR *UNKNOWN *UNKNOWN *BLANK (*UNKNOWN))

Any suggestion greatly appreciated.

Thank you

Don

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription
related questions.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related questions.


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2026 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.