×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
Le 23/11/2021 à 20:34, Rob Berendt a écrit :
The real bear was getting the wwpn's broadcasting from hmc/vios/IBMi to the DD2500. I could not seem to get it to work as an alternate IPL device. Only an alternate installation device as not until IBM i was in DST would it broadcast the wwpn I could easily see in the profile config in the hmc for that lpar. And you cannot manually enter in the wwpn's. You have to select them from a list.
Rob Berendt
WWPN? I had misread your initial posts, as I thought it was virtual SCSI
based. So, in the VIOS, you have to make sure that the virtual FC server
adapter (209 if I understand fine) is mapped to a physical FC adapter.
lsmap -all -npiv -fmt ":" VIOS command is your friend. Then you have to
make sure that a zone exists on the SAN with the virtual WWPN of the
virtual FC client adapter of your partition (209 as well if I understand
fine).
You can find the WWPN of the vFC client adapter of the partition in the
profile, or from the HMC with a command like this one:
lshwres -m systemname -r virtualio --rsubtype fc --level lpar -F
lpar_name,lpar_id,slot_num,wwpns | grep partitionname
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact
[javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
