× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. December 2020

Re: Change the FSP IP address

Thanks Paul..there are two changes needed...there is an IP assigned to the vHMC which is the one accessible from the "Console Management" link.  Since I was changing networks as well as host IP I needed to make that change AFTER I accessed the ASM and changed the FSP IP.  There was an option for launching the ASM in the vHMC which basically started a new "tab" and I signed in.  On that menu I chose "Network Configuration" and changed the IP address, subnet mask, and gateway entries and then saved the changes.  Then I changed the console settings so that the HMC could find the FSP again.

So far, it works when I am attached to the local network but I am still trying to sort out the issues of accessing the FSP IP remotely through our VPN so I can run the vHMC on my laptop connecting through the VPN to the FSP.  Just need to put my network and routing hat on for a while...

Pete Helgren
www.petesworkshop.com
GIAC Secure Software Programmer-Java
AWS Certified Cloud Practitioner
Twitter - Sys_i_Geek IBM_i_Geek

On 12/30/2020 2:43 PM, Steinmetz, Paul via MIDRANGE-L wrote:
On the vHMC, look for Console Management, Change Network settings, lan adapters.
I don't have a vHMC, but an HMC.

Paul

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Pete Helgren
Sent: Wednesday, December 30, 2020 3:38 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Change the FSP IP address

Seems like the only way to change an FSP IP address is to use ASMI to do that.  Is that correct?   I barely remember setting up the vHMC a year ago and that is when I set the IP.  I'd like to change it if possible. There are some instructions that mention getting to the ASM through the HMC which is what I will try, but it seems like I saw where the ASMI had a web interface that could be used directly?

--
Pete Helgren
https://smex-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.petesworkshop.com&umid=90897e67-07e2-432e-aaca-21a8f444ff50&auth=438b0784514c1757bd202125ca4db8b0abdb021e-9edcfb07adc4ebac201df1ad68e33bd67804b077
GIAC Secure Software Programmer-Java
AWS Certified Cloud Practitioner
Twitter - Sys_i_Geek IBM_i_Geek

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link: https://amazon.midrange.com

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.