Re: How to stop NWSD from starting

[Thomas Garvey <tgarvey@xxxxxxxxxx>]

There must be someplace where the NWSD keeps track of the last network 
storage space linked to it.
Yesterday, when I unlinked and removed the third and fourth linked 
spaces, all was well.
But last night the server shut down as a result of a power outage and I 
couldn't get the client partition to come up because the NWSD was in a 
failed state on the host partition.
Once I got it varied off, and changed the Online at IPL parameter, I 
also unlinked the two remaining storage spaces from the NWSD.
Then I linked them again, one at a time, letting the system assign the 
drive numbers. This time the NWSD varied on normally and the client 
partition was activated normally.

Thanks for your help.

Best Regards,

Thomas Garvey


On 7/10/2020 2:45 PM, Rob Berendt wrote:
> There was one where I used to always have to use FRCVRYOFF.  Then I changed something in the config and no longer had to do that.
>
> Rob Berendt