No you do not want to put a bridge on that interface. Use one of the other
three on the NIC card. If you put ANY ip addresses on the physical side of
the bridge, you will not enjoy the results.
CPU pegged at max, no console interaction, no work no nuttun..... IPL is
the only way out at that point. IBM goes out of their way to tell you not
to do that. So being inquisitive, I tried it on my test system (that's what
it's for afterall) Yep, just as IBM predicted, bad things.....
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>
Sent: Monday, June 1, 2020 9:03 AM
To: 'midrangel@xxxxxxxxxxxxxxxxx' <midrangel@xxxxxxxxxxxxxxxxx>; 'Midrange
Systems Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: RE: Ethernet options for IBM i client LPAR with no physical
resources, all virtual
Currently, no bridge.
I had a bridge on another LPAR back on my P7, but none currently.
I have the docs that I used to create the bridge.
The problem is, on my host, my main line, ETHAGG01, would have to be varied
off to add/change the Bridge identifier.
Bridge identifier . . . . . . . . : *NONE
Paul
-----Original Message-----
From: midrangel@xxxxxxxxxxxxxxxxx <midrangel@xxxxxxxxxxxxxxxxx>
Sent: Monday, June 01, 2020 9:48 AM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx>
Cc: Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>
Subject: RE: Ethernet options for IBM i client LPAR with no physical
resources, all virtual
I had indicated earlier I would use the bridge. In your environment you
already have one do you not? So adding the new partition to the bridge is a
simple as making sure you create the guest ethernet adapter in the HMC to be
on the same VLAN as the other partitions that participate as clients on the
bridge network.
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of
Steinmetz, Paul via MIDRANGE-L
Sent: Sunday, May 31, 2020 7:48 PM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx>
Cc: Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>
Subject: Ethernet options for IBM i client LPAR with no physical resources,
all virtual
Power9.
V7R3.
I hosting i
I'm creating a new client LPAR for testing.
I created one years back on a Power7 client, had to create a an Ethernet
bridge on the I host.
Does the Ethernet need to be bridged or are there other options?
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
midrange.com
