× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



That really sounds like an "application" firewall. It gets "netstat"
which is common across the board, but won't let WRKACTJOB go.....?

--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Steve
Pavlichek
Sent: Friday, May 29, 2020 11:20 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: RE: ACS 5250 VPN Issues

To make this even more interesting, some commands work and some don't.
NETSTAT *IFC works, WRKACTJOB does not. GO LICPGM works but WRKLICINF does
not.
Same results using ACS and putty.
I'm running as QSECOFR, so it should not be an authority issue.

Again, these commands all work from the console

From: midrangel@xxxxxxxxxxxxxxxxx<mailto:midrangel@xxxxxxxxxxxxxxxxx>
Sent: Friday, May 29, 2020 11:01 AM
To: 'Midrange Systems Technical
Discussion'<mailto:midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: RE: ACS 5250 VPN Issues

Two separate IP addresses/OS types, One works, one does not. Sounds like
firewall to me.

Is this an "application firewall" where it's actually scanning the
application vs. just the IP/Port? Global protect does that.

--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Steve
Pavlichek
Sent: Friday, May 29, 2020 9:00 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: ACS 5250 VPN Issues

Working with a new customer who has tight VPN policies. They give me access
to specific IP addresses and ports for each IP.
We've been struggling to get ACS 5250 working properly but I thought we had
it working last night as I was able to sign on to their system via 5250 (I
was able to sign on via HMC/Console with no problem).

Now I am finding that while I can sign on and get to a command line, the
session locks up when ever I enter a command. Same command works fine when I
am signed onto the console. If it matters this is a new LPAR with v7r4 and
latest PTFs (I did not create LPAR or load OS).

Is this a firewall issue or am I missing something on the OS side?

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.